Yeah because I have been so busy with actually making money that I didn't get time to post the updated instructions. I have already created the instructions, I just haven't posted them on sourceforge yet. Mike ________________________________ From: backshall1 <backshall1@...> To: korgpolyex@yahoogroups.com Sent: Tuesday, July 10, 2012 9:19 AM Subject: RE: [korgpolyex] where does the 4th capacitor go on boards version 1.5b Oops, so that link I just posted is not valid for v1.5.b? Sorry about that. Don B. ________________________________ From:korgpolyex@yahoogroups.com [mailto: korgpolyex@yahoogroups.com ] On Behalf Of Michael Hawkins Sent: Tuesday, July 10, 2012 9:13 AM To: korgpolyex@yahoogroups.com Subject: Re: [korgpolyex] where does the 4th capacitor go on boards version 1.5b John, I may have been slow to ship out the kits but other than that, how has this been a "really shit deal"? The capacitor goes up in the far upper right hand corner. Right next to the ten pin 2x5 pin connector labelled "AtomaHawk". Yes, the instructions are slightly out of date. But I did update them and they will be posted at sourceforge tonight. And yes, the only difference between 1.5 and 1.5b is the different cap position which I mentioned above. Mike ________________________________ From:jcmayer3000 <johnnymayer@...> To: korgpolyex@yahoogroups.com Sent: Monday, July 9, 2012 11:21 PM Subject: [korgpolyex] where does the 4th capacitor go on boards version 1.5b TO MICHAEL: this has been a really shit deal for me. your instructions are terrible. and you're also a turd. where does the 4th capacitor go on the boards labeled version 1.5b near the 74HC174 chip? there's a total of about 11 points that it could be plugged into. an immediate response would be most helpful.
Message
Re: [korgpolyex] where does the 4th capacitor go on boards version 1.5b
2012-07-10 by Michael Hawkins