Korg Poly800/EX800 Users group photo

Yahoo Groups archive

Korg Poly800/EX800 Users

Index last updated: 2026-04-03 22:01 UTC

Message

Re: [korgpolyex] Re: MG speed pot?

2010-09-15 by Michael Hawkins

Yes, check out pin 9 of IC1 (NJM2069). That is the linear VCF cutoff control 
point.


Mike

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.