Korg Poly800/EX800 Users

Tim,

The HAWK-800 and AtomaHawk kits combined control Moog Slayer (which is really just extreme resonance).

But no, the Moog Slayer pots do not need to be three wire.

Mike




________________________________
From: tim.tashpulatov <tim.tashpulatov@...>
To: korgpolyex@yahoogroups.com
Sent: Thu, April 8, 2010 5:16:32 AM
Subject: [korgpolyex] Moog Slayer pots question

  
Hi all,

I wonder if the two pots for the Moog Slayer mod should really be of 3-pin type.

My point is that I've got a digital resistor chip from AD, and it features two channels (or 'digital pots'). One has 3 pins, and the other is 2-pin only. The idea was to use this chip to control the Moog Slayer parameters programmatically.

Thanks!