Korg Poly800/EX800 Users

Hi again,

I added a couple new pics to my photo album: http://
launch.ph.groups.yahoo.com/group/korgpolyex/photos/browse/d961?c=

You'll see original VR's attached to cables for switching between 
moogslayer and factory settings.

Also, you'll find a pic with two cables soldered to filter IC (dont 
remember the name right now) for 12/24 DB fliter switching 
capabilites. Definetly worth the mod! http://launch.groups.yahoo.com/
group/korgpolyex/message/551

This is Atom's site: http://synthmod.net/korg/fm800/. Be sure to 
check the samples page, you'll find some stuff of my own AND a couple 
additional pics of my modded Poly (and other people's).

Check the moogslayer section as well http://synthmod.net/korg/
moog_slayer/

have fun,

DaVE



--- In korgpolyex@yahoogroups.com, "belochim" <belochim@...> wrote:
>
> Hey Dave,
> 
> Thanks for your Post. But in the pix you've described the VRs are
> soldered away and I can't see if he just crushed them or if he used
> them elsewhere. 
> I'm looking for a way to just leave the VRs as they are and solder a
> knob to them instead which lets you choose whether you go over them
> VRs or over the pots that are freshly installed.
> And I can't seem to find Atom Smashers Homepage. It's not on the 
link
> list and just googling for it brought strange results. Could you
> please send me a link?
> 
> Thanks for your help :)
> 
> Cheers,
> Beloc
> 
> --- In korgpolyex@yahoogroups.com, "Dave Bowman" <davidmochen@> 
wrote:
> >
> > HI there,
> > 
> > 
> > Just check a post i did some 2 or 3 days ago with a link to yet 
> > another post by Olaf... you've got the switch there.
> > Also check Atom Smasher's website where you'll find some photos 
of my 
> > modded poly that hit the right spot you are lookgin for - i kept 
> > original vr's and wired them to the switch.
> > 
> > dave
> > 
> > 
> > --- In korgpolyex@yahoogroups.com, "belochim" <belochim@> wrote:
> > >
> > > Dear Poly-Freaks and Fans,
> > > 
> > > Has anyone done - and can tell me how it works - a non 
destructive 
> > mod
> > > of the Poly 800? I'd like to mod my new Poly without breaking 
the 
> > VRs.
> > > I've seen pictures and heard sounds of this modification 
before. Its
> > > fat! There's a switch above the pots which lets you choose 
whether 
> > the
> > > signal runs through the VRs or the freshly soldered pots you 
just
> > > built in. Very nice idea I think since you can always go back 
to the
> > > old sound and you don't limit your midi-capabilities :)
> > > 
> > > Any help will be greatly appreciated
> > > Beloc
> > >
> >
>