Korg Poly800/EX800 Users

Hello all, this is my first post here :) I have a Poly-800 Mk1. When I 
bought it, it was dirty, smelled like if Poly-800s could smoke, one key 
was not working and Midi IN port seemed dead. I cleaned it during hours, 
did the moog slayer mod, the battery mod, bought a socket and replaced 
the Sharp PC900 because it looked bad to me (oxidized legs), and 
restored the original patches using my MiniDisc plugged into the 
cassette port.

Synth have brought to live again, all worked at the first chance. All? 
No, not all. Midi IN is still dead :( Midi OUT works, but looks like the 
oxidized PC900 was not the cause (or, at least, the *only* cause).

I downloaded the schematics on the files section of this mailing list, 
and I see the Midi IN "circuit" looks very simple. Maybe IC26 is dead? 
There are a lot of other thing connected to it, and Midi IN is the only 
failing. Shame that today is sunday, so I can't buy another until 
tomorrow :(

If someone had a similar problem and fixed it, it would be great to know 
your experience.

Thanks in advance :)

Manu