Korg Mono/Poly

Hi everyone,


can anyone tell me how to sync the tempo of the MonoPoly arpeggiator
to the TR606?

Thanks
Luis

The Mono/Poly can send and respond to trigger signals and voltage signals for the specification of pitch. As long as the voltages between both units are compatible, you should have no problem connecting them.

I am not sure which signals the 606 can send though.

On Sat, Nov 8, 2008 at 10:23 PM, homemcouve <homemcouve@yahoo.com> wrote:

Hi everyone,

can anyone tell me how to sync the tempo of the MonoPoly arpeggiator
to the TR606?

Thanks
Luis

Hi, the TR606 has 2 trigger out minijacks. One associated with the Low
Tom and the other to the High Tom.

I tried connecting but I must have done something wrong because I
failed to sync them...

Any help?

thanks
Luis





--- In korg_mono-poly@yahoogroups.com, "Nick Fletcher" <nickeax@...>
wrote:

>
> The Mono/Poly can send and respond to trigger signals and voltage

signals

> for the specification of pitch. As long as the voltages between both

units

> are compatible, you should have no problem connecting them.
>
> I am not sure which signals the 606 can send though.
>
> On Sat, Nov 8, 2008 at 10:23 PM, homemcouve <homemcouve@...> wrote:
>
> > Hi everyone,
> >
> > can anyone tell me how to sync the tempo of the MonoPoly arpeggiator
> > to the TR606?
> >
> > Thanks
> > Luis
> >
> >
> >
>

The specifications are:

TRIGGER OUT x 2
Mini-jack (HT, LT; +14V. 20 mSec pulse)



--- In korg_mono-poly@yahoogroups.com, "homemcouve" <homemcouve@...>
wrote:

>
> Hi, the TR606 has 2 trigger out minijacks. One associated with the Low
> Tom and the other to the High Tom.
>
> I tried connecting but I must have done something wrong because I
> failed to sync them...
>
> Any help?
>
> thanks
> Luis
>
>
>
>
>
> --- In korg_mono-poly@yahoogroups.com, "Nick Fletcher" <nickeax@>
> wrote:
> >
> > The Mono/Poly can send and respond to trigger signals and voltage
> signals
> > for the specification of pitch. As long as the voltages between both
> units
> > are compatible, you should have no problem connecting them.
> >
> > I am not sure which signals the 606 can send though.
> >
> > On Sat, Nov 8, 2008 at 10:23 PM, homemcouve <homemcouve@> wrote:
> >
> > > Hi everyone,
> > >
> > > can anyone tell me how to sync the tempo of the MonoPoly arpeggiator
> > > to the TR606?
> > >
> > > Thanks
> > > Luis
> > >
> > >
> > >
> >
>

More info:


The TR-606 Rhythm Composer provides two independant, programmable
TRIGGER OUTs to allow interfacing with synthesizers or sequencers.
Each trigger is a positive 15 Volt, 20 millisecond pulse suitable for
activating either the Trigger or Gate inputs of most major brands of
equipment.

A synthesizer such as the Roland SH-09 may be gated to process its own
oscillators. By combining a mono synthesizer such as the SH-09 with a
sequencer such as one of the Roland CSQ digital sequencers, the TR-606
TRIGGERs will start and/or step the sequencer/synthesizer combination
for many programmed musical lines. The triggers may also be used to
control the rhythm and rate of the Arpeggio sections of the Roland
JUPITER polyphonic synthesizers.

The two TRIGGER OUTs correspond to rhythms programmed into the Low Tom
or High Tom positions, rhythms determined by the Track/Program
selector and programming. These instruments may be used simultaneously
with their TRIGGER OUT or programmed specifically to provide with
TRIGGER OUTPUT rhythms, silencing the instruments using the individual
INSTRUMENT MIX LEVEL (E) controls.

[The trigger outputs can also be used to trigger other analog
drumkits, such as those made by Simmons, Midwest Analog Products, etc.
- ed]


--- In korg_mono-poly@yahoogroups.com, "homemcouve" <homemcouve@...>
wrote:

>
> The specifications are:
>
> TRIGGER OUT x 2
> Mini-jack (HT, LT; +14V. 20 mSec pulse)
>
>
>
> --- In korg_mono-poly@yahoogroups.com, "homemcouve" <homemcouve@>
> wrote:
> >
> > Hi, the TR606 has 2 trigger out minijacks. One associated with the Low
> > Tom and the other to the High Tom.
> >
> > I tried connecting but I must have done something wrong because I
> > failed to sync them...
> >
> > Any help?
> >
> > thanks
> > Luis
> >
> >
> >
> >
> >
> > --- In korg_mono-poly@yahoogroups.com, "Nick Fletcher" <nickeax@>
> > wrote:
> > >
> > > The Mono/Poly can send and respond to trigger signals and voltage
> > signals
> > > for the specification of pitch. As long as the voltages between both
> > units
> > > are compatible, you should have no problem connecting them.
> > >
> > > I am not sure which signals the 606 can send though.
> > >
> > > On Sat, Nov 8, 2008 at 10:23 PM, homemcouve <homemcouve@> wrote:
> > >
> > > > Hi everyone,
> > > >
> > > > can anyone tell me how to sync the tempo of the MonoPoly

arpeggiator

> > > > to the TR606?
> > > >
> > > > Thanks
> > > > Luis
> > > >
> > > >
> > > >
> > >
> >
>

Hi Louis

> can anyone tell me how to sync the tempo of the MonoPoly arpeggiator
> to the TR606?

Trigger-out606 to Arpeggiatorclock-in-MP will cause a late triggering of
the Arpeggiator. The Arpeggiator is a switched trigger in. You need some
adapter like

http://www.doepfer.de/faq/gen_faq.htm#S-Trig



Best regards, Florian

Thanks for the info Florian!

--- In korg_mono-poly@yahoogroups.com, Florian Anwander
<fanwander@...> wrote:

>
> Hi Louis
>
> > can anyone tell me how to sync the tempo of the MonoPoly arpeggiator
> > to the TR606?
> Trigger-out606 to Arpeggiatorclock-in-MP will cause a late

triggering of

> the Arpeggiator. The Arpeggiator is a switched trigger in. You need

some

> adapter like
>
> http://www.doepfer.de/faq/gen_faq.htm#S-Trig
>
>
>
> Best regards, Florian
>