Hello Juppdich
Am 25.03.2015 um 18:25 schrieb juppdich@yahoo.de [korg_mono-poly]:
To locate them in the schematic of KLM354
(http://fa.utfs.org/diy/korg_monopoly/mp_06_klm-354_vco_schemo.gif) have
a look at the right side of the plan. There are the gate inputs. Track
the line of Gate 1. It is routed to an OpAmp 4558. At its output a
resistor leads to two diodes in series. The second one of these two
diodes is the LED.
Florian
Am 25.03.2015 um 18:25 schrieb juppdich@yahoo.de [korg_mono-poly]:
> I was also not able to locate those Leds in the Scematic. MaybeThe LED is D103/203/303/403
> because the Part where the VCOs are drawn has bad Detail Quality in
> the Scematics.
To locate them in the schematic of KLM354
(http://fa.utfs.org/diy/korg_monopoly/mp_06_klm-354_vco_schemo.gif) have
){kind=link}
a look at the right side of the plan. There are the gate inputs. Track
the line of Gate 1. It is routed to an OpAmp 4558. At its output a
resistor leads to two diodes in series. The second one of these two
diodes is the LED.
Florian