Hi Florain thanks for taking a look at me ideas.
The phase sync is the same idea you have just suggested where I'm triggering the sync from the gate signal. Of course there are a few hoops you need to jump through to make the gate signal suitable for this action.
Here is an early recording of phase sync in action.
It has since been refined to work along with the original hard sync effect.
https://soundcloud.com/audio-presto/korg-monopoly-phase-lock
here is a bass line recording.
https://soundcloud.com/alan-melvyn-dicker/monopoly-live-psybass
The wide range detune feature sounds like it will be very doable. thanks for the tip :)
From: Florian Anwander <fanwander@mnet-online.de>
To: korg_mono-poly@yahoogroups.com
Cc: Alan <alanmdicker@yahoo.co.uk>
Sent: Tuesday, 19 February 2013, 15:39
Subject: Re: [korg_mono-poly] modulation expansion kit for the korg mono/poly
To: korg_mono-poly@yahoogroups.com
Cc: Alan <alanmdicker@yahoo.co.uk>
Sent: Tuesday, 19 February 2013, 15:39
Subject: Re: [korg_mono-poly] modulation expansion kit for the korg mono/poly
Hello Alan
great ideas!
Am 19.02.2013 14:40, schrieb Alan:
modulationspeed for sure.
I'd suggest also a "wide-range" option for the tune potentiometer of
VCO4 (decrease R130 240k -> 22k or even less).
And another idea: A sync pulse from Gate to all VCOs. This resets the
VCOs on each note and assures, that bassnotes always starte at the same
phase with all oscillators, even if the VCOs then are free running.
You may add my mods too.
Florian
great ideas!
Am 19.02.2013 14:40, schrieb Alan:
> 4: VCO1 as mixable source to MG1 mod wheel destinations.I'd use VCO4. Because you cannot detune VCO1 and you want to tune the
modulationspeed for sure.
> 6: VCO1 keyboard CV defeat. This comes in handy when you wish toAgain: Why VCO1? Use VCO4.
> modulate the other VCOs or the external audio from a fixed frequency
> oscillator. it also has a great effect on the sync function. VCO
> plays the last note CV it received but still excepts CV summed from
> the octave switch and Mod / pitch wheel CVs.
I'd suggest also a "wide-range" option for the tune potentiometer of
VCO4 (decrease R130 240k -> 22k or even less).
> 7: Phase sync on all oscillators.How would you achieve it technically?
And another idea: A sync pulse from Gate to all VCOs. This resets the
VCOs on each note and assures, that bassnotes always starte at the same
phase with all oscillators, even if the VCOs then are free running.
You may add my mods too.
Florian