On Apr 20, 2012, at 3:21 AM, Florian Anwander wrote:Hello
> Anyways, now what I found is that if I'm using the arpeggiator
> clocked by MG2 and the sample and hold clocked by MG2, the sample and
> hold is lagging. I think the S/H circuit is looking for a positive
> going trigger while MG2 is spitting out a negative going trigger. I
> could make a little trigger converter in my circuit to fix this.
> Anyone have any opinions or experience with this?
It is not the MG2. It is the Arpeggiator: the arpeggiator clock-in is a
"switched trigger" and - if fed with a voltage clock - clocks on the
negative edge.
You find a instruction for the modification on
http://fa.utfs.org/diy/korg_monopoly/modifications.html
look for: "V-Trigger to S-Trigger Adapter for the Arpeggio Clock"
Florian
--
http://fa.utfs.org/
Message
Re: [korg_mono-poly] Sample and hold clock trigger
2012-04-23 by Hayden Van Moskowitz
That worked. Thanks!
I also soldered the MG2 clock on the 356 board instead. Specifically to the right side of the 10k resistor from the arpeggiator trigger mod at J42. Now the sample and hold is clocked by MG2 or by the external arpeggiator trigger in depending on what is hooked up.