Korg Mono/Poly

Hi Jeppe


I am not sure, whether I answered you personally or not. So once again 
to the list: This should be a faulty IC7 on the VCO board. Originally a 
HD14066BP, but you can take a CD4066B (or even a CD4016B which is pin 
compatible) without any problem.
If you replace this chip, it might(!) be possible that you have to 
readjust the V/Octave setting

Florian



> Hello everyone.
> 
> So, I bought my MP almost a year ago, which resulted in me selling all the other synths I had laying around - they all faded in comparison. It sounds so fraking good! 
> 
> One problem though. My VCO 2 wont stop "portamentoing" before the MP has been turned on for more then an hour. This means I often have to play it with VCO 2 turned alle the way down. And in Poly mode it's quite annoying (even thoughs it is a cool effect with one oscillator sliding after the other in a sloppy fashion when doing chords).
> 
> When i turn the portamento button all the way down VCO 2 acts like portamento is turned all the way up. When i turn the portamento button up a notch VCO 2 acts like the other VCO's.
> 
> Do you have any experience with this problem?
> 
> Oh, and is it possible to repair the microcontroller buttons on the MP? My "hold" buttons is very bad at senseing when i press it.
> 
> Thanks a lot.
> Jeppe  
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
> 
>