no
its a proper led backlight 5005 lcd replacement
module
same chipset
you have to remove the efoil invertor add a current
limiting resistor from the 5v source of the efoil invertor to the + voltage of
the efoil connector on the psu board
then you can use the original cables that the efoil
used on the old display
you have to desolder these from the old display and
fit them to the a k connection on the new display
----- Original Message -----From: maggooster@...Sent: Saturday, November 24, 2012 5:27 PMSubject: [k5synth] Re: LED BacklightI'm interested in the LED back light option as well. Is it, possibly, just a matter of hooking up bright LEDs and placing them around the display?
Using duct tape, of course, to hold them in place ;)
Sent from my iPod