Synth-DIY Yahoo! Groups Archives

Re: [exs] Digest Number 748

2002-10-28 by eartoyz

Hi,
I appreciate the info on loading the SAM horns. Itook your advice and had a
friend with a PC take them off disk,extract and rewrite them to cd.
I still don't see the instruments in the EXS after putting these files in
the Sampler Instruments folder. None of them have the giga extension at the
end. Are they supposed to? The 389MB files say SAM_0001.0MA and then there
is a smaller 55MB that reads SAM_0002.OEF.
Thanks,
Hayes
'> Message: 4

Show quoted textHide quoted text

> Date: Fri, 25 Oct 2002 13:36:30 -0400
> From: Ned Bouhalassa <ned@...>
> Subject: Re: giga conversion/how to?
> 
> Hayes, I had the same problem. Here's the solution: find a friend with a PC
> and a cd burner, and go over with a couple of beers and 2 blank cd roms.
> 
> The whole thing (drag onto hd, decompress, burn cds) can take less than 45
> minutes.
> 
> Ned
> 
> eartoyz wrote:
> 
>> I  received my SAM horns the other day and just dropped the
>> SAM_HORN,EXE into the sampler instruments folder (as Logic
>> suggested I do) but I see nothing of it in the EXS.
>> I'm on a Mac is there something I need to do to convert this file?
>> I searched the archive,Emagic web help,and all the read me files
>> ,but couldn't find this info.
>> I'm really looking forward to hearing this after all that has been
>> discussed here.
>> Many thanks!
>> Hayes
> 
> 
> 
> 
> http://www.nedfx.com
> 
> Ned Bouhalassa
> 
> n e d @ n e d f x . c o m
> 
> 
> 
> 
> 
> ________________________________________________________________________
> ________________________________________________________________________
> 
> Message: 5
> Date: Fri, 25 Oct 2002 13:46:34 -0400
> From: garywhirled <garypozner@...>
> Subject: Re: giga conversion/how to?
> 
> dear hayes
> 
> there is a utility file on the sam horn site. but the easiset way is to find
> an ibm person and explode your file on their computer and then just grab the
> files into your sampler instrument folder.
> 
> gary
> 
> on 10/25/02 1:26 PM, eartoyz at eartoyz@... wrote:
> 
>> I  received my SAM horns the other day and just dropped the
>> SAM_HORN,EXE into the sampler instruments folder (as Logic
>> suggested I do) but I see nothing of it in the EXS.
>> I'm on a Mac is there something I need to do to convert this file?
>> I searched the archive,Emagic web help,and all the read me files
>> ,but couldn't find this info.
>> I'm really looking forward to hearing this after all that has been
>> discussed here.
>> Many thanks!
>> Hayes

Re: [exs] Digest Number 748

2002-10-28 by Ned Bouhalassa

Their size looks right to me, but that's not what they're supposed to have 
as a suffix. Try changing the name to SAM_0001.gig and SAM_0002.gig - maybe 
that'll help. You can also contact the gang at Project SAM directly 
(http://www.projectsam.com/), but don't forget they're in Europe, so you 
won't get a reply until tomorrow.

Cheers.

Ned

eartoyz wrote:

> Hi,
> I appreciate the info on loading the SAM horns. Itook your advice and had a
> friend with a PC take them off disk,extract and rewrite them to cd.
> I still don't see the instruments in the EXS after putting these files in
> the Sampler Instruments folder. None of them have the giga extension at the
> end. Are they supposed to? The 389MB files say SAM_0001.0MA and then there
> is a smaller 55MB that reads SAM_0002.OEF.
> Thanks,
> Hayes

http://www.nedfx.com

       Ned Bouhalassa

n e d @ n e d f x . c o m

EXS 24 Logic Sampler Users Group

Re: [exs] Digest Number 748

Re: [exs] Digest Number 748

Re: [exs] Digest Number 748

Move to quarantaine