Drive Jumper Settings....
2011-12-28 by emuemu2
New Member.... Hello to all & a Happy New Year to all... from Dublin I ve just got an Emulator II. Model 6028 Serial 434, with library. The previous owner had
Messages
Browse messages
Page 7 of 48 · 2353 messages matched
Re: [emulatorII-list] Re: Problems after removing HD/New Eproms needed
2011-12-23 by Rish
Hey we have both scanner and main Roms in stock. www.route66studiod.com Rish Life is like MIDI, your either IN, OUT or THRU.
Re: Problems after removing HD/New Eproms needed
2011-12-23 by Jason
Thanks for the reply. I really don t think it can be anything else but the eproms. If I put it all back together, it boots right up. I m going to buy an eprom
Re: Problems after removing HD/New Eproms needed
2011-12-22 by Ryan Supak
(Oh, and the EPROM files themselves are hosted in the Files section of this group.) rs
Re: Problems after removing HD/New Eproms needed
2011-12-22 by ryansupak2
Jason, I m in the process of doing the exact same thing. I ve not gotten my machine working yet (it never did work, I think the drives were bad when I got it)
Re: [emulatorII-list] Problems after removing HD/New Eproms needed
2011-12-19 by Nick Zampiello
it does sound like a termination problem. old computer systems were so sensitive to that stuff. what s the HxC? i m not super savy with Eii innards.. do
Problems after removing HD/New Eproms needed
2011-12-19 by Jason
Hi all, I removed the existing HD from my machine. I removed all of the relevant hardware and put the Zilog chip in the socket where the daughterboard was. Now
looking for tech in DC area
2011-12-04 by edbaldi
Can anyone one recommend a tech in the Unites States, DC / Batimore / Phili area? thx e
WTB: Emulator II and/or emax (rack or keyboard) in Great condition : )
2011-11-18 by jason samonik
Looking for Emulator II and/or emax (rack or keyboard) in Great condition : ) e.mail me details, price, and picts please! `jAs.n
Front 5.25" panel for SD HxC ?
2011-10-27 by Gil
I m about to purchase the SD HxC for my E-II, is there any custom made panel for mounting it so it exactly fits the slot where the original floppy drive gets ?
Re: [emulatorII-list] Re: Help for a newbie?
2011-10-18 by Ed Baldi
Hexafuzz - thanks The EII did ship with disks in both drives. I do have a base knowledge to poke around inside (i successfully refurbished a prophet 10 a few
Re: Help for a newbie?
2011-10-18 by hexafuzz
... Did your E-II arrive with scrap disks inserted and latched to protect the drives during shipping? Try the simple fixes first: Clean the drives with some
Re: [emulatorII-list] Re: Help for a newbie?
2011-10-18 by Ed Baldi
thanks for sharing Pete. Some our friends own boats, some vintage cars, some motorcycles...I can say that I knew what I was getting into. On the positive side,
Re: [emulatorII-list] Re: Help for a newbie?
2011-10-17 by Peter Forrest
I ve had experience of sending a definitely fully working EII , very well packed, by air and having it arrive not working, and not fixable by the buyer s
Re: [emulatorII-list] Re: Help for a newbie?
2011-10-17 by Ed Baldi
Great info thanks. I will give a closer look to the IC s. This EII does have the RS422 upgrade. Question: do you think it could be something as simple as all
Re: Help for a newbie?
2011-10-17 by esynthesist
Mmm... if both drives have the same problem, it means the problem is not caused by the drives (this would have been the easier type of problem :-) Of course
Re: [emulatorII-list] Re: Help for a newbie?
2011-10-16 by Ed Baldi
Thanks for the reply James. I suspect you are right. e ... From: James Ulibarri Subject: Re: [emulatorII-list] Re: Help for a newbie?
Re: [emulatorII-list] Re: Help for a newbie?
2011-10-15 by James Ulibarri
I doubt it ever worked. I would say less than 50% of EII units are ever working right out of the shipping box. One out of 6 for me in 10 years. Half of the
Re: [emulatorII-list] Re: Help for a newbie?
2011-10-15 by Ed Baldi
Thanks for the response. Yes, same thing when I insert in other drive. Also if I power up with a disk inside the LED says that it s booting the OS but nothing
Re: Help for a newbie?
2011-10-15 by esynthesist
That s a pretty low serial number you have :-) Congratulations with the purchase. What happens when you insert the disk in the other drive ? The same thing ?
Help for a newbie?
2011-10-15 by edbaldi
Hello everyone and thank you in advance for any advise you can provide. I have trolled the various EII resources before posting but I am at a loss and looking
Re: Sd cabel to e2
2011-10-13 by Wolfgang Krell
Ok so than its better to give up and looking on ebay for one of this working mashines! Hopefully i will find one;) thx kris
Re: Sd cabel to e2
2011-10-12 by hexafuzz
... I have a PB5300cs working here. To restate and add to what Esynth has said: Use the Modem Port. AppleTalk must be active and set to Infrared Port (*not*
Re: Sd cabel to e2
2011-10-12 by esynthesist
It doesn t really matter whether the DB25 is shown from the front or from the back: the numbering is standardized, so if you turn a connector around, the
Re: Sd cabel to e2
2011-10-12 by Wolfgang Krell
... Another thing! After selecting differend modes like modem or printer port the pbook will freez and i have to reset the pbook!;(
Re: Sd cabel to e2
2011-10-12 by Wolfgang Krell
Hi kris thanks again for the quiiiiiick response! Now i have solder the cable. iam not sure about the picture of the cable describtion from the db-25 because
Re: Sd cabel to e2
2011-10-11 by esynthesist
... Of course... what else would you do ? :-) ... No. You can keep the 6-wire cable, bacause the EII only uses 6 wires on its RS422 port. Pin 1 and pin 7 of
Sd cabel to e2
2011-10-11 by Wolfgang Krell
Hi there! Question about sd cabel. i was opening my normal mac conection cabel there where only 6 cable but the mini din cabel in the describtion has 8. Is it
Powerbook with sd and scsi cabel
2011-10-11 by Wolfgang Krell
Hi there i have a powerbook 5300 i try to connect the pb via scsi cable because i have a external scsi adapter for the pb. idont have a scsi cabel to test it!
Re: [emulatorII-list] cant open sound designer file
2011-10-09 by Nick Zampiello
it s probably Sound Designer. a Mac OS 8-9 app that can talk to old samplers... z NEW ALLIANCE EAST!!!! ... http://www.newallianceeast.com
cant open sound designer file
2011-10-09 by Wolfgang Krell
hi i download the sd file from files. its a .bin file but i cant open it! can some one tell me whats to do? thx
Upgrade a Emulator II (512KB) en II+(1MB)
2011-10-09 by jbfairlight
That day I tried to upgrade a Emulator II (512KB) to II+(1MB), but for now it gets stuck, I check all the changes and it s OK! That has already transformed a
Re: What are the floppy card reader disk available for Emulator II ?
2011-10-06 by esynthesist
As far as I know there s only one card reader compatible with the E-II and that s the floppy replacement device called SD HxC . So... that s the one working
What are the floppy card reader disk available for Emulator II ?
2011-10-06 by Gil
I read lot of talks about the various card readers developed for the Emulator II. Which one works the best after all the experiments ? Thanks ;)
Re: Adjust Power Supply Output
2011-10-06 by Gil
All I can say is never touch R109 and R110 variable resistors. They don t affect the main voltages and there s no available calibration procedure on the web
Adjust Power Supply Output
2011-10-03 by trickstar303
Has anyone in here adjusted/calibrated the EII PSU themselves in order to output the correct voltages? I have an EII that has a floppy reading problem. When a
Alan Wilder EII Own library
2011-09-30 by mario
If someone knows something about it, please post!.
Sound Designer EII from files-section
2011-09-27 by m.sislack
Hello everybody :) I´ve gut a question concerning the Sound Designer EII from the files-section: When I unpack it with stuffit-expander I get disk-relates
OMI Booklet
2011-09-26 by rob@emulatorarchive.com
Hi The booklet and manual have new owners, thanks for all the interest. Regards Rob
OMI Booklet
2011-09-26 by rob@emulatorarchive.com
Hi folks, I have an original OMI booklet with a listing of the Universe of Sounds Volume 1 CDROM for the Emulator II and the CDS3 User Manual. All in a small
Re: EII Still from the Studio
2011-09-25 by adrien
cool ! is it from the 80 ?
EII Still from the Studio
2011-09-25 by Tyler Burns
Here s a shot of me working in the studio with my EII+HD and an SQ-80. This is actually a still taken from 15mm footage. We re tracking to 2 and mixing to
Re: [emulatorII-list] Re: Compatible Apple CD-Rom Drives
2011-09-22 by Tyler Burns
Ok, thanks! ________________________________ From: trickstar303 To: emulatorII-list@yahoogroups.com Sent: Thursday, September 22, 2011
Re: Compatible Apple CD-Rom Drives
2011-09-22 by trickstar303
I had bought a Dell USB floppy drive for my PC on Ebay. They can be had for cheap. I think I paid $11 or so. Then I use a utility program called MacDisk on my
Re: [emulatorII-list] Re: Compatible Apple CD-Rom Drives
2011-09-22 by Tyler Burns
I meant to say I think the CD300+ is not compatible. (I also have the CD300e.) How does one get the CD rom driver for the Mac Classic ONTO the Mac Classic,
Re: Compatible Apple CD-Rom Drives
2011-09-22 by trickstar303
You will need the apple cd rom driver for the old macs to recognize the drive. Its available on the web if you search. I should have it somewhere. Let me know
Re: EII Front Panel Label
2011-09-22 by trickstar303
Respect for taking on such a tedious task. Sounds like you know what you re doing and as if you re on the right track. Keep me in the loop as i m interested.
Re: [emulatorII-list] Re: Compatible Apple CD-Rom Drives
2011-09-22 by Tyler Burns
I haven t tried a CD300e, but I ve heard it s not compatible. I could be wrong. What do you mean by correct Apple CD rom driver. I just bought the Mac
Re: Compatible Apple CD-Rom Drives
2011-09-22 by trickstar303
I trust you re using the correct Apple CD rom driver? I had a 300e in the past and it worked with my mac classic... Have you actually tried the plus model?
Re: [emulatorII-list] Re: EII Front Panel Label
2011-09-22 by James Ulibarri
Not really a bummer.. Just change the colors so it matches. Not a deal breaker. It was scanned in and used as a template for a layer. Then build what you