eml synthesizers

Hi, I'm looking for a complete set of the EML 400 schematics. Can
someone scan them in for the archives?

ROmeo

>Hi, I'm looking for a complete set of the EML 400 schematics. Can
>
>someone scan them in for the archives?
>
>
>
>ROmeo

I have several pages of schematics for the EML400 sequencer but I have no
way of knowing how complete a set they are. I can't read schematics at
all. In any case I will go thru them and if it's feasable, I will try to do
this. It may take a while since I don't own a scanner and onlt have acces s
to one at my job, I'll try to get to it over the next few weeks. With a bit
of luck, I'll hit a slow day and be able to knock them out. Let me know if
you find another source....

Mike Berman
digiboy@...

That would be cool if you could scan them in. I used to have the set, but
have lost them since. Someone recently posted an analogue sequencer project
that uses CD4013 flip flops for the individual stages. The 400 used the
same thing. I'm hoping there's some way to modify this guy's design to add
some 400ness to it. Wasn't there some kind of progressive retrograde
setting or something?

R./

on 4/28/02 9:49 PM, Mike B (digiboy) at digiboy@... wrote:

>> Hi, I'm looking for a complete set of the EML 400 schematics. Can
>>
>> someone scan them in for the archives?
>>
>>
>>
>> ROmeo
>
>
> I have several pages of schematics for the EML400 sequencer but I have no
> way of knowing how complete a set they are. I can't read schematics at
> all. In any case I will go thru them and if it's feasable, I will try to do
> this. It may take a while since I don't own a scanner and onlt have acces s
> to one at my job, I'll try to get to it over the next few weeks. With a bit
> of luck, I'll hit a slow day and be able to knock them out. Let me know if
> you find another source....
>
> Mike Berman
> digiboy@...
>
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> emlsynth-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

>That would be cool if you could scan them in. I used to have the set, but
>
>have lost them since. Someone recently posted an analogue sequencer project
>
>that uses CD4013 flip flops for the individual stages. The 400 used the
>
>same thing. I'm hoping there's some way to modify this guy's design to add
>
>some 400ness to it. Wasn't there some kind of progressive retrograde
>
>setting or something?

As I said, I don't read schematics and I have almost no real understanding
of electronics, cicuitry etc.
There is a way to get the EML sequencer to triggersteps in reverse order.
Does "progressive retrograde" mean fire in reverse order but loop start
advances one step at end of each cycle? I think that's possible on the 400
too. I suppose the schematics may help you do such things on another
sequencer but the actual process of creating most sequence permutations on
the EML is a simple matter of patching and adjusting sliders, doesn't
require any internal modification.


Mike Berman
digiboy@...