eml synthesizers

I bought a few 10k Center tapped pots (5k/5k) a couple years ago for my SteamSynth, but never ended up using them. They're a different value than the EMLs, but with possibly a few value adjustment they should work just fine. I can let a few go if you'd like to PM me.

--- In emlsynth@yahoogroups.com, ganesha <goaqihai@...> wrote:
>
> Hi,
>
> The VCO's of the eml 101 let you sweep the waveform continuously from triangle to square to saw. This is done with a center tapped pot but  these are very difficult to find.
>
> Would it be possible to mimic this behaviour with a single or double ganged pot and some opamps? I would like to build a module that morphs 3 audiosignals with 1 knob in a similar way.
>
> Thanks!
>

Back again...

I hope it's not too off topic and possibly verboten here, but I'll be offering a 5U/MU (Moog/Synthesizers.com) module in a couple months. I morphs up to 4 inputs with variable morphing "width". The morph is controlled by a single 0-5v input. Eack input/output is a separate VCA. And there's a mix output.

Sorry about the blatent promotion. Am I to be forgiven?

--- In emlsynth@yahoogroups.com, "Doug" <dougslocum@...> wrote:
>I would like to build a module that morphs 3 audiosignals with 1 knob in a similar way.
> >
> > Thanks!
> >
>

From: emlsynth@yahoogroups.com [mailto:emlsynth@yahoogroups.com] On Behalf Of Doug
Sent: Saturday, November 05, 2011 1:17 PM
To: emlsynth@yahoogroups.com
Subject: [emlsynth] Re: mimic center tapped pots in EML electrocomp101

 

Back again...

I hope it's not too off topic and possibly verboten here, but I'll be offering a 5U/MU (Moog/Synthesizers.com) module in a couple months. I morphs up to 4 inputs with variable morphing "width". The morph is controlled by a single 0-5v input. Eack input/output is a separate VCA. And there's a mix output.

Sorry about the blatent promotion. Am I to be forgiven?

--- In emlsynth@yahoogroups.com, "Doug" <dougslocum@...> wrote:
>I would like to build a module that morphs 3 audiosignals with 1 knob in a similar way.
> >
> > Thanks!
> >
>

http://web.archive.org/web/20090104103413/http://users.rio.com/senorris/junk/ct/ct.html

http://www.geofex.com/article_folders/potsecrets/potscret.htm

With non-sealed pots which are held together with metal tabs, such as many Alphas and Alps pots, it is easy to add more taps.

--- In emlsynth@yahoogroups.com, "George Mattson" <axisair@...> wrote:
>
> Blasphemy!!!
>
> (Hi Doug)
>
>
> _____
>
> From: emlsynth@yahoogroups.com [mailto:emlsynth@yahoogroups.com] On Behalf
> Of Doug
> Sent: Saturday, November 05, 2011 1:17 PM
> To: emlsynth@yahoogroups.com
> Subject: [emlsynth] Re: mimic center tapped pots in EML electrocomp101
>
>
>
>
> Back again...
>
> I hope it's not too off topic and possibly verboten here, but I'll be
> offering a 5U/MU (Moog/Synthesizers.com) module in a couple months. I morphs
> up to 4 inputs with variable morphing "width". The morph is controlled by a
> single 0-5v input. Eack input/output is a separate VCA. And there's a mix
> output.
>
> Sorry about the blatent promotion. Am I to be forgiven?
>
> --- In emlsynth@yahoogroups.com <mailto:emlsynth%40yahoogroups.com> , "Doug"
> <dougslocum@> wrote:
> >I would like to build a module that morphs 3 audiosignals with 1 knob in a
> similar way.
> > >
> > > Thanks!
> > >
> >
>