eml synthesizers

I've added photos of the VP-1 Voltage Processor.
When I received the original module from EML one of the Allen Bradley
pots were cracked so I replaced both the Gain and Offset pots with
multiturns circled in photo 2.
The module is less than 2" square, also I used the CM2 jack for a two
way switch to bypass the VP-1.

Photos of the Tech Sheet added to the VP-1 album.

I was going to scan these or mail out photo copies but I think the
photos of the sheets are workable.

--- In emlsynth@yahoogroups.com, "Robert" <rob80b@...> wrote:
>
> I've added photos of the VP-1 Voltage Processor.
> When I received the original module from EML one of the Allen Bradley
> pots were cracked so I replaced both the Gain and Offset pots with
> multiturns circled in photo 2.
> The module is less than 2" square, also I used the CM2 jack for a two
> way switch to bypass the VP-1.
>

If anyone would like the original jpegs please contact me.

Robert

--- In emlsynth@yahoogroups.com, "Robert" <rob80b@...> wrote:
>
> Photos of the Tech Sheet added to the VP-1 album.
>
> I was going to scan these or mail out photo copies but I think the
> photos of the sheets are workable.
> --- In emlsynth@yahoogroups.com, "Robert" <rob80b@> wrote:
> >
> > I've added photos of the VP-1 Voltage Processor.
> > When I received the original module from EML one of the Allen Bradley
> > pots were cracked so I replaced both the Gain and Offset pots with
> > multiturns circled in photo 2.
> > The module is less than 2" square, also I used the CM2 jack for a two
> > way switch to bypass the VP-1.
> >
>