Emax

I have had to replace SCSI fuses on AKAI products before... it's actually a common problem with them.  Troubleshooting my SCSI problem I decided to see if flipping the cable upside down would help.  I may have blown the protection fuse in the process.  Does anyone have information on the SCSI system inside the EMAX?  I haven't looked inside the sampler yet, but I have searched old messages with no results.  I used to be able to detect a ZIP drive through the external port and recently have trouble doing so.  Are the internal and external SCSI connections on the same controller / fuse?  Any insight into this system to help me understand it would be appreciated.

Thank you,
Everett

--- In emax@yahoogroups.com, "evy_newt" <evy_newt@...> wrote:
>on the akai,s it a feed back fuse on the 5v termpower line its there if there is a amp overload it blows the fuse to protect the circuit 

i fit resettable fuses in the akai,s but i have not seen a termpower fuse in the emax11 i dont see it in the schematics 

> I have had to replace SCSI fuses on AKAI products before... it's actually a common problem with them.  Troubleshooting my SCSI problem I decided to see if flipping the cable upside down would help.  I may have blown the protection fuse in the process.  Does anyone have information on the SCSI system inside the EMAX?  I haven't looked inside the sampler yet, but I have searched old messages with no results.  I used to be able to detect a ZIP drive through the external port and recently have trouble doing so.  Are the internal and external SCSI connections on the same controller / fuse?  Any insight into this system to help me understand it would be appreciated.
> 
> Thank you,
> Everett
>

You have schematics?  I would like to have a copy of them if you don't mind sending them.

I hope I didn't fry something in the SCSI controller.  That would be really unfortunate...

--- In emax@yahoogroups.com, "evy_newt" <evy_newt@...> wrote:
>im sorry but i dont have the license to send them you copywrite and all

if you want a copy you will need to pay for them as i had to 

jammie

> You have schematics?  I would like to have a copy of them if you don't mind sending them.
> 
> I hope I didn't fry something in the SCSI controller.  That would be really unfortunate...
>

Where did you buy them?  Is it a pdf/digital thing or paper?

--- In emax@yahoogroups.com, "evy_newt" <evy_newt@...> wrote:
>there copies of the blue prints 

there a3 in size and there for different sections analog digital logic control lcd and switch interface the scsi intrface the floppy controller

the place i got them from no longer exists it was an emu repair stockist in the uk but since have stopped support for the old samplers they only fix emulator 4 series and emulatorx

i had one of the last copies 

if you want a copy you will have to ask for permission from emu if we are allowed to put it on the list but dont hold your hopes up

> Where did you buy them?  Is it a pdf/digital thing or paper?
>

Musicparts sells copies of the Emax and Emax II service manuals in PDF form

http://www.musicparts.com/products.asp?Company=E-Mu

Tuesday, May 26, 2009, 8:54:00 PM, you wrote:

> Where did you buy them? Is it a pdf/digital thing or paper?