Emax

hey all, I am SO PUMPED... just recieved my drive from
route66studios.com (who ships mad fast I must say) and am trying to
get it up and running... just wanted to ask if anyone who got the
route66 replacement drive could tell what the ID 0 jumper setting is,
mine doesn't seem to be set to it... any info would be great thanks
~AJB

Normally the jumper is labeled DS0 or DS1, not ID0 or ID1.

The jumper should be at 0, not 1...

Don't know if that helps you or not...

Ted

On Jun 22, 2006, at 5:14 PM, Andy wrote:

> hey all, I am SO PUMPED... just recieved my drive from
> route66studios.com (who ships mad fast I must say) and am trying to
> get it up and running... just wanted to ask if anyone who got the
> route66 replacement drive could tell what the ID 0 jumper setting is,
> mine doesn't seem to be set to it... any info would be great thanks
> ~AJB
>
>
> 



[Non-text portions of this message have been removed]

got it working like 10 minutesafter I posted this actually, the drive
was working fine, simply had the scsi cable in backwards... now all I
need is the plus operating system back but the thing boots 3.2 just
fine and I am quite pleased! R66 is the shizzle!
~AJB


--- In emax@yahoogroups.com, "elmacaco" <elmacaco@...> wrote:
>
> is it not working in your emax as set from route 66?
> 
> I wouldn't change it unless it isn't working in the emax, and in
that case I'd ask them since the drive should be set to work on their end.

> 
> Maybe their website has some info.
> 
> 
>   ----- Original Message ----- 
>   From: Andy 
>   To: emax@yahoogroups.com 
>   Sent: Thursday, June 22, 2006 8:14 PM
>   Subject: [emax] r66 jumper setting?
> 
> 
>   hey all, I am SO PUMPED... just recieved my drive from
>   route66studios.com (who ships mad fast I must say) and am trying to
>   get it up and running... just wanted to ask if anyone who got the
>   route66 replacement drive could tell what the ID 0 jumper setting is,
>   mine doesn't seem to be set to it... any info would be great thanks
>   ~AJB
> 
> 
> 
>    
> 
> [Non-text portions of this message have been removed]
>

is it not working in your emax as set from route 66?

I wouldn't change it unless it isn't working in the emax, and in that case I'd ask them since the drive should be set to work on their end.

Maybe their website has some info.

  ----- Original Message ----- 
  From: Andy 
  To: emax@yahoogroups.com 
  Sent: Thursday, June 22, 2006 8:14 PM
  Subject: [emax] r66 jumper setting?


  hey all, I am SO PUMPED... just recieved my drive from
  route66studios.com (who ships mad fast I must say) and am trying to
  get it up and running... just wanted to ask if anyone who got the
  route66 replacement drive could tell what the ID 0 jumper setting is,
  mine doesn't seem to be set to it... any info would be great thanks
  ~AJB



   

[Non-text portions of this message have been removed]