Emax

I finaly could finish the upgrade of my emax to a SE/HD.
The PCD60b was recognized by the machine, but only with the PLUS OS.
It is a bit weird because my jumper were set to ID0 on the card reader.
i formated a few compact flash and copied the os to those, also copied the
SE presets, it boots up from the CF and loads all progs perfectly.

i found the reason why i could not upgrade to SE, the slim floppy i got
seem to have a not so sensible write protect detection system, i had to put
2 layer of tape to get it to see it as a writable floppy.

i will check for the jumper on the reader but i'm almost certain it is set
to be on ID0.

best
K

http://www.krikor.fr
+33632199413

For Live&Dj bookings contact: cedric@...


[Non-text portions of this message have been removed]