Emax

you speak of the mainboard or LCD panel?

 

De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie
Envoyé : jeudi 31 janvier 2013 16:36
À : emax@yahoogroups.com
Objet : Re: [emax] Re: hello I encounter a problem with my emax II

 

  

check for cold solder joints on the back as the pads copper plate is week
and can crack

is it a light green board or dark green

the light green boards are the worst

----- Original Message ----- 
From: philippe.69 
To: emax@yahoogroups.com <mailto:emax%40yahoogroups.com>  
Sent: Thursday, January 31, 2013 9:57 AM
Subject: RE: [emax] Re: hello I encounter a problem with my emax II

I already cleaned the contacts emax works except the masterbutton

De : emax@yahoogroups.com <mailto:emax%40yahoogroups.com>
[mailto:emax@yahoogroups.com <mailto:emax%40yahoogroups.com> ] De la part de
emuemax92
Envoyé : jeudi 31 janvier 2013 02:01
À : emax@yahoogroups.com <mailto:emax%40yahoogroups.com> 
Objet : [emax] Re: hello I encounter a problem with my emax II

It sounds like two different problems.

The masterbutton can be dirty (bad/dirty pad). Maybe a cleaning of the
underneathside of masterbutton with some alcohol will work. As long with the
contacts on the printboard.

What do you mean with the emax is not being lit? The screen is not lit or
the LED's don't light up?

Regards,
Frank

--- In emax@yahoogroups.com <mailto:emax%40yahoogroups.com>  , "Vavasseur
Philippe" wrote:
>
> button master and ineffective
> 
> emax stay 2 months without being lit , master button no longer works
> 
> I check the contacts connection to mainboard they are all ok
> you have an idea of the problem
> it worked fine before
> 
> thanks,
> philippe
>

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]