Emax

hiya

I sent you a mail msg, dont know if it has worked.
you can email me directly at deanhoner@...

Cheers
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> walsall west midlands
> 
> synth and sampler repair
> 42 glastonbury crescent
> walsall
> ws3 2rf
>   ----- Original Message ----- 
>   From: deanhoner@... 
>   To: emax@yahoogroups.com 
>   Sent: Monday, August 27, 2012 9:01 PM
>   Subject: [emax] Re: Hard Drive for Emax HD
> 
> 
>     
>   I'm in Sheffield, and you?
> 
>   --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
>   >
>   > i can do it for you
>   > 
>   > were abouts are you in the uk
>   > ----- Original Message ----- 
>   > From: deanhoner@ 
>   > To: emax@yahoogroups.com 
>   > Sent: Monday, August 27, 2012 8:33 PM
>   > Subject: [emax] Re: Hard Drive for Emax HD
>   > 
>   > 
>   > 
>   > OK thanks for that. Sounds a bit complicated to me...
>   > Is there anyone in the UK that could sort this out for me? I dont mind paying!
>   > 
>   > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
>   > >
>   > > yes if its a hd it has an internal 50 pin scsi copnnector and a 26 pin idc connectorfor adding a 25db scsi cable but you need to punch a hole for the 25db socket
>   > > 
>   > > if you fit the pcd-50b you will need a slim floppy drive and convertor 
>   > > 
>   > > for every thing to work properly other wise you have to do some jumper wires to disable floppy drive so that it can boot from just a hd
>   > > ----- Original Message ----- 
>   > > From: deanhoner@ 
>   > > To: emax@yahoogroups.com 
>   > > Sent: Sunday, August 26, 2012 11:55 AM
>   > > Subject: [emax] Re: Hard Drive for Emax HD
>   > > 
>   > > 
>   > > 
>   > > OK So the PCD-50b is installed in place of the floppy drive and I simply disconnect or remove the Hard Drive internally? 
>   > > 
>   > > The PCD50b is SCSI, are there SCSI connectors inside the EMAX HD or will it need modifying?
>   > > 
>   > > Thanks
>   > > 
>   > > --- In emax@yahoogroups.com, Ted Summers <djtbs1@> wrote:
>   > > >
>   > > > Get a flash drive like a PCD-50b from mechware.
>   > > > Note only the PC-Card slot works in the drive with the Emax....
>   > > > 
>   > > > Then you can ditch the noise and easily change the media
>   > > > And use EMXP to build up some images.
>   > > > 
>   > > > If you want it internal you can get a slim floppy drive.
>   > > > 
>   > > > See my site for examples
>   > > > 
>   > > > http://djtbs1.wordpress.com/
>   > > > 
>   > > > 
>   > > > On Aug 25, 2012, at 8:15 AM, Dean Honer wrote:
>   > > > 
>   > > > Hi
>   > > > I'm a new member of the forum.
>   > > > I have just bought a nice Emax HD keyboard. It came with no floppies. The
>   > > > hard drive is incredibly noisy and only works intermittently. Are there any
>   > > > replacement hard drives available for the Emax? When working the software
>   > > > and sound banks load up just fine.
>   > > > 
>   > > > Thanks
>   > > > 
>   > > > [Non-text portions of this message have been removed]
>   > > > 
>   > > > 
>   > > > 
>   > > > 
>   > > > 
>   > > > [Non-text portions of this message have been removed]
>   > > >
>   > > 
>   > > 
>   > > 
>   > > 
>   > > 
>   > > [Non-text portions of this message have been removed]
>   > >
>   > 
>   > 
>   > 
>   > 
>   > 
>   > [Non-text portions of this message have been removed]
>   >
> 
> 
> 
>   
> 
> [Non-text portions of this message have been removed]
>