Emax

you need through hole pots they dont sell them they only do 

pcb mounted with solder lugs those ones fit to slots in a pcb and mounting holes  then you use flying leads to solder to them

you need alpha pot sliders but they need to be solder through hole mounted

as long as you measure the length and the pins

best bet would be to desolder 1 the data one as you can still use the up down keys to scroll through the display

the emax1 has brand new sliders on it i will try and dig through my receipts toi find where i brought it from
  ----- Original Message ----- 
  From: freddy1771994 
  To: emax@yahoogroups.com 
  Sent: Saturday, June 09, 2012 12:08 AM
  Subject: [emax] slider replacement


    
  Hi,

  the data and volume sliders of my emax II don't work fine anymore. Sometimes they skip parts or if I enter the lowest/highest level they jump to the opposite value. Recalibrating and cleaning did not help...

  I'm wondering if these could replace them or which specifications should I keep in mind?:

  http://www.musikding.de/Passive-parts/Potentiometers/Sliding-pots/Sliding-pot-60mm-10k-lin::3353.html

  Is it difficult to change them or is it just desoldering the old ones replacing them by the new ones?

  Thank you very much and a nice weekend!

  Best regards
  Freddy



  

[Non-text portions of this message have been removed]