Emax

I will have to look up IC 3 in schematics when I get home.... at work right
now.....
IC3 - shouldn't be removing that for SCSI update, though....
Only change IC 13, put in IC 6, and change the TIMPAL (IC 49).
Then the solder work, of course- but none of that involves IC 3.

Regards,
Ted



On Tue, Jun 22, 2010 at 12:53 PM, RayH <cuddlycreep@...> wrote:

>
>
> that was a typo it was actually ic 3
> so i dont know im im stuck with a nice looking emax with no fuctionality or
> not
>
>
> --- In emax@yahoogroups.com <emax%40yahoogroups.com>, Ted Summers <djtbs1@...>
> wrote:
> >
> > IC 13 is the Boot EPROM and is changed with the SCSI update.
> > I believe I have a Non-SCSI EEPROM around somewhere still- but it is most
> > likely you may have bent a pin or some such.
> >
> > Why are you giving up on the SCSI upgrade?
> > If you are unsure of being able to complete it, send it to me and I can
> > complete it and test it for $50 (labor) + shipping. Just send your Emax
> > Logic, and the SCSI kit parts you have.
> >
> > Regards,
> > Ted
> >
> > On Tue, Jun 22, 2010 at 7:48 AM, RayH <cuddlycreep@...> wrote:
> >
> > >
> > >
> > > hi all
> > > so recently i pulled out my ic 13 chip from my emax thinking it needed
> to
> > > come out for the scsi mod. but when i put it back in and gave up on
> > > installing scsi. i turned on my emax and im stuck at please insert
> floppy
> > > after the floppy disk has been sitting in the drive
> > > is it possible that i corrupted this chip?
> > > and does anybody know where i can get another one?
> > > thank you for any help
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>  
>


[Non-text portions of this message have been removed]