Emax

What brand of CF cards are you using?  How long are you allowing for  
the cards to format?  I just successfully formatted two 1GB CF cards  
on an Emax II Turbo rack, but each card took about three hours to  
complete the "Verifying" process.


On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:

> Isnt that exactly what I recently bought and
> failed with? Not the same brand "Acard"
> but exactly the same spec.
>
> I got 2 scsi cases allready. :)
>
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
> >
> > you are going to find it hard now most kits have been sold buy a  
> acard 7720u scsi to ide adapter by an external scsi cdrom case get a  
> ide to cf adapter try and get a atapi compliant so that it is hot  
> swappable
> >
> > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size  
> ide to cf card drive this set up is going to cost you a bit so shop  
> around on ebay for the scsi xternal cdrom case discard the cdrom and  
> the scsi to ide interface
> > ----- Original Message -----
> > From: drifter7508
> > To: emax@yahoogroups.com
> > Sent: Saturday, February 06, 2010 9:20 PM
> > Subject: [emax] Point me to the places where to buy the right CF  
> kit.
> >
> >
> >
> > So, Im fed up with all failures now.
> >
> > Can somebody please point me to a CF kit that actually 100%
> > works with EMAX II.
> >
> > I would not like to buy a slim floppy and such, I'd rather have a
> > the CF kit installed in an external scsi case.
> >
> > Thx.
> >
> >
> >
> >
> >
> >
> > ----------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:  
> 02/06/10 07:35:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
> 



[Non-text portions of this message have been removed]