Emax

Yeah!!.. a classic failed switchmode.. glad you were successful Daniel :D



--- In emax@yahoogroups.com, "Daniel Baum" <daniel@...> wrote:
>
> PS.
> 
> I forgot to add in my previous message: Thanks to whoever it was that (apparently) correctly diagnosed my problem!
> 
> Daniel
> 
> 
>   ----- Original Message ----- 
>   From: Daniel Baum 
>   To: emax@yahoogroups.com 
>   Sent: Friday, November 27, 2009 3:21 PM
>   Subject: Re: [emax] Re: Emax II RIP? (not!)
> 
> 
>     
>   Hi all,
> 
>   Mine seems to be fixed! Installing the PSU was literally a 5-minute job, and the Emax II turned on and played when I tested it.
> 
>   I may have been imagining it, but it also seemed quieter. Possibly the old PSU was making a noise.
> 
>   I'll send pictures later on.
> 
>   Highly recommended.
> 
>   D.
> 
>   Got mine today! Very fast shipping from Miami to Sweden I must say,
>   1 week. =) I will try to install it in my Emax II tonight.
>   Hope its just to replace the old PSU without modifications
>   to this "new" unit. My old PSU is actually working fine. Its just that
>   whining sound that comes when i load from the HD that worries me.
>   So if anyone wants to buy my old PSU and fix it up or something you can contact me.
> 
>   --- In emax@yahoogroups.com, "Daniel Baum" <daniel@> wrote:
>   >
>   > Mine arrived yesterday. All I have had time to do was open the box and look at it.
>   > 
>   > I don't foresee any problems installing it. I will mark all of the plugs to make sure I plug them in the right way.
>   > 
>   > I probably won't have time to do it until the weekend.
>   > 
>   > I will post photos etc when I do it.
>   > 
>   > 
>   > Daniel
>   > 
>   > 
>   > 
>   > My PSU was shipped today so I will recieve it in a week or two.
>   > Please share your install procedure and tell us how it goes
>   > there is anything else to do then to "just replace" it with the old one =)
>   > 
>   > --- In emax@yahoogroups.com, "dbaum0000" <daniel@> wrote:
>   > >
>   > > 
>   > > 
>   > > --- In emax@yahoogroups.com, "drifter7508" <drifter7508@> wrote:
>   > > >
>   > > > 
>   > > > I just ordered one yesterday for my Emax II from that company.
>   > > > I will let you all know how it goes.
>   > > >
>   > > 
>   > > I also ordered one and I'm supposed to be receiving it today.
>   > > 
>   > > Hopefully my Emax II should be back up and running quite soon.
>   > > 
>   > > Is there anything I should know about before installing it? According to the seller it is practically identical to the original and a simple swap.
>   > > 
>   > > 
>   > > Daniel
>   > >
>   > 
>   > 
>   > 
>   > 
>   > 
>   > [Non-text portions of this message have been removed]
>   >
> 
>   [Non-text portions of this message have been removed]
> 
> 
> 
>   
> 
> [Non-text portions of this message have been removed]
>