Emax

first thing to do is open the machine a reset all socketed ic then put the machine back to gether and try again the ic chips can work loose or curode use deoxit to clean the pins on the ic do 1 chip at a time get a white marker and put an arrow on the chip and the pcbthe arrow pointing up on the ic and then place an arrow facing down pionting to the arrow on the ic that way you wont lose the orientation of the ic


  ----- Original Message ----- 
  From: chevytravelleruk 
  To: emax@yahoogroups.com 
  Sent: Monday, November 09, 2009 1:06 PM
  Subject: [emax] Emax II Service manual plea


    
  Hi all

  I have an Emax II Turbo keyboard which has developed an intermittant fault. 
  Periodically, some of the keys fail to trigger and this has now worsened so that certain number buttons don't respond either. Now I believe that I must have a failing Scanning chip in the Emax somewhere, but sadly, I don't know how to locate/replace it. Does anyone here have a service manual they would be willing to sell/copy?.. or could anyone advise me which chips need changing and their locations?.. 
  I would be prepared to pass this on to a reputable repairer/engineer(I am London based), but sadly they seem to be few and far between these days.. so any recommendations there?.. 

  Help 



  


------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.5.425 / Virus Database: 270.14.55/2489 - Release Date: 11/08/09 07:37:00


[Non-text portions of this message have been removed]