Emax

So, it will be difficult to sample a vinyl directly :(

If I read the manual (page 73), it is clear that I could sample in stereo :/


--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> yes but obvouisly you need to sample left channel as a mono sample and assign it to pri
> 
> and then sample right channel as a mono sample and assign it to sec
> 
> then hard pan the pri channel hard left and the sec channel hard right most samplers do it this way 
> 
> excert they record it stereo then split it into 2 mono wave samples via onboard software
> 
> i use awave as you can record it in stereo through your sound card then you can split it into 2 mono files
> 
> then i use cooleditpro to converte sample rate to that of the emax then i use emxp to make a bank image file with my wave files setting the pri and the sec then i load the file into the emax for editing and for making patches
>   ----- Original Message ----- 
>   From: yojx 
>   To: emax@yahoogroups.com 
>   Sent: Thursday, October 22, 2009 8:50 AM
>   Subject: [emax] Re: Why does my Emax II sample in mono ?
> 
> 
>     Ok, that's what I though. But, finally, I have to sample in mono ... twice ?
> 
>   --- In emax@yahoogroups.com, Elk Latham <elk_latham@> wrote:
>   >
>   > Further more when placing stereo samples, you have to do it twice. Once for the pri sample, once for the sec sample.
>   > 
>   > Elk
>   > 
>   > 
>   > 
>   > 
>   > ________________________________
>   > From: jammie <jammie.emma@>
>   > To: emax@yahoogroups.com
>   > Sent: Wednesday, October 21, 2009 7:36:55 AM
>   > Subject: Re: [emax] Why does my Emax II sample in mono ?
>   > 
>   >   
>   > when recording in stereo it uses the pri for 1 channel and the sec for the other then they are panned left and right 
>   > 
>   > this is how a stereo sample is done 
>   > 
>   > its the same with the emax1 you can record stereo but you can play tereo files you just have to save each wavefile as a seperate mono file
>   > ----- Original Message ----- 
>   > From: yojx 
>   > To: emax@yahoogroups. com 
>   > Sent: Wednesday, October 21, 2009 2:40 PM
>   > Subject: [emax] Why does my Emax II sample in mono ?
>   > 
>   > Hello,
>   > 
>   > My Emax II is a 2213 2MB Rack model (I have checked it in the back of the sampler) and I use the OS version 2.10..
>   > 
>   > So, it supposes to allow sampling in stereo but it does not. For instance, when I navigate to Sample > Place Sample, the choices are Pri/Sec but no Ster option.
>   > 
>   > Do you have any idea ? Do you think it is an OS issue ?
>   > 
>   > Thanks
>   > 
>   > ------------ --------- --------- --------- --------- --------- -
>   > 
>   > No virus found in this incoming message.
>   > Checked by AVG - www.avg.com 
>   > Version: 8.5.422 / Virus Database: 270.14.23/2448 - Release Date: 10/20/09 10:43:00
>   > 
>   > [Non-text portions of this message have been removed]
>   > 
>   > 
>   > 
>   > 
>   > [Non-text portions of this message have been removed]
>   >
> 
> 
> 
>   
> 
> 
> ------------------------------------------------------------------------------
> 
> 
> 
>   No virus found in this incoming message.
>   Checked by AVG - www.avg.com 
>   Version: 8.5.422 / Virus Database: 270.14.24/2449 - Release Date: 10/20/09 18:42:00
> 
> 
> [Non-text portions of this message have been removed]
>