Yahoo Groups archive

Emax

Index last updated: 2026-04-28 23:23 UTC

Message

Re: Help My Emax won´t power on anymore...

2008-12-29 by tripmastermonkee

@ marc - 

could i get a quote from you estimating the total cost of labor and
parts to repair/replace the emax power supply? Any info would be
appreciated, thanks!!

--- In emax@yahoogroups.com, "jammie.emma" <jammie.emma@...> wrote:
>
> --- In emax@yahoogroups.com, "marc" <marc_sps@> wrote:
> >
> emax2 psu wont fit yes you can send it to me and i will fix it 
> 
> jammie 
> 
> > i disconnected all the cables and checked the fuse on the PSU (looks
> ok), No luck so far. 
> > The Emax still makes the buzzing sound when i want to power it on
> and nothing happens. 
> > Since it is not possible to use an PC psu, does the EMAX2 PSU fit ? 
> > Jammie...in case i won´t be able to find a replacement, could i send
> you the PSU for fixing 
> > ? 
> > 
> > Cheers
> > 
> > Marc
> > 
> > 
> > --- In emax@yahoogroups.com, "jammie.emma" <jammie.emma@> wrote:
> > >
> > > --- In emax@yahoogroups.com, "marc" <marc_sps@> wrote:
> > > >
> > > no you cannot fit a pc power supply in just fix the emax 1 
> > > 
> > > check the internal fuses also and the psu caps check for leakage if
> > > your not happy fixing it your self you can send it to me
> > > 
> > > synth and sampler repair
> > > 42 Glastonbury crescent 
> > > walsall
> > > westmidlands
> > > ws3 2rf
> > > united kingdom
> > > 
> > > > I was leaving my Emax 1 HD SE out of my rack for a few days (was
> > > getting ready to get a card 
> > > > reader installed) i tried power it on today and...nothing...
> > > > I get a buzzing sound which is probably coming from the power
supply
> > > but nothing more....
> > > > I am guessing that the power supply is broken. Does anybody
know if
> > > i can fit in an old PC 
> > > > power supply ? where could i get a new one ? 
> > > > 
> > > > thanks 
> > > > 
> > > > Marc
> > > >
> > >
> >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.