Emax

Hello esynthesist,
Yes I have tried different disks, and it's all the same.
When I use the OS3.2 disk it says 'CRC error' which means (I think) 'Cyclic Redundancy Check'. A way to check that data was received correctly.
But that message does not occur with the other disks, not with HD version anyway.
 
Marko

--- Den lör 2008-06-21 skrev esynthesist <esynthesist@...>:

Från: esynthesist <esynthesist@...>
Ämne: [emax] Re: Problem with Scanner MPU?
Till: emax@yahoogroups.com
Datum: lördag 21 juni 2008 17.54






Does this problem occur with all of your disks ?
Because sometimes if there's a defective soundbank or OS on the 
floppy disk, it can cause the Emax immediately to "crash". 
Have you tried with a floppy *only* containing the OS, but no bank ?
As far as I remember you should also use the appropriate OS, e.g. no 
OS for HD versions if you don't have a HD Emax...

Of course there's only a small chance that the above is the actual 
cause of your problem, but you never know: the above problem would be 
much easier to solve than trying to find spare parts...

///E-Synthesist 

--- In emax@yahoogroups. com, Marko Laukka <markolaukka@ ...> wrote:
>
> Hello Ted,
> It turns on normal and ask for 'Insert disk!'. If I load the OS3.2 
disk that came with Emax, it loads it and gives error message: 'CRC 
error', and hangs. If  I put one of my own disks (OS1.1 HD) it loads 
and says: 'wait a moment' loads the disk and display the loaded 
bank/preset and then hangs, i.e. it doesn't matter which buttons I 
press, nothing happens. The 'Enter' led lights up as normal but no 
other leds (except for 'Analog processing'- led at beginning) or any 
sequences of leds turns on. So I don't get any hint from some 
diagnostic check at start up. 
> The technical manual says; Problem: 'Software loads and then 
display goes blank', Solution: 'Change bad scanner MPU'.
> But in my case the display keep showing the loaded sound/preset and 
the whole front panel is locked/don't respond to any button pushes. 
The only led that stays on is the 'Enter' led.
> Â 
> Thanks in advance,
> Marko
> 
> --- Den lör 2008-06-21 skrev Ted Summers <djtbs1@...> :
> 
> Från: Ted Summers <djtbs1@...>
> Ämne: Re: [emax] Re: Problem with Scanner MPU?
> Till: emax@yahoogroups. com
> Datum: lördag 21 juni 2008 02.18
> 
> 
> 
> 
> 
> 
> When you say it loads the disk and just hangs there. what exactly 
> happens.
> 
> Sequence of evemts- what leds come on on the panel and do they stay 
> on or change?
> What shows in LCD? Does it say diagnostics, then loading software 
or 
> only diagnostics. These are all important because there may be 
other 
> explanation.
> 
> Regards.
> Ted
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> ____________ _________ _________ _________ _________ _________ _
> Går det långsamt? Skaffa dig en snabbare bredbandsuppkopplin g. 
> Sök och jämför hos Yahoo! Shopping.
> http://shopping. yahoo.se/ c-100015813- bredband. html?
partnerId=96914325
> 
> 
> [Non-text portions of this message have been removed]
>

 














      __________________________________________________________
Låna pengar utan säkerhet. Jämför vilkor online hos Yahoo!
http://shopping.yahoo.se/c-100390123-lan-utan-sakerhet.html?partnerId=96915014

[Non-text portions of this message have been removed]