Emax

May be my problem.  I will try that and report back.  Is the disc 
cleaner a spray or is it a floppy you insert?  I will check out 
office max or office depot.  Thanks for the tip.  -Alan

--- In emax@yahoogroups.com, David Dehart <mytunes@...> wrote:
>
> Are you booting from your disk drive ?
> If so, you could just have a dirty drive that can be
> fixed with a disk drive cleaner that you can get at
> office supply stores.
> 
> I had a unit that kept hanging-up on booting from the
> disk drive, saying bad disk or disk error or something
> like that and it was just dirty.
> 
>   It would do that even with no disk in the drive..it
> was dirty enough that it couldn't get past the disk
> drive check to boot from the internal drive.
> 
> I hope that helps.....
> Respect,
> Dave
> > HI dude, thanks a lot, but my emax no load, any
> > times,
> > this problm is forever, in your case, buy a laptop
> > with midi controller, and so on
> > 
> > --- Alan <pbass58@...> escribió:
> > 
> > > If I understand this correctly, my Emax HDSE is
> > > doing something very 
> > > similar.  The last couple of gigs it has not
> > wanted
> > > to read the 
> > > operating system.  It powers up, but the usual
> > start
> > > up noises are 
> > > very slow, and it won't read the discs or
> > something.
> > >  I need to bring 
> > > it home and read the LCD and post.  It has been
> > very
> > > unnerving trying 
> > > to get it functioning at a gig.  I have had to
> > turn
> > > it on/off many 
> > > times until it reads properly and starts
> > > functioning.  I'm looking 
> > > into getting an es-4000 rack for samles and
> > getting
> > > an Alesis ion as 
> > > my second keyboard controller.  I will post with
> > the
> > > error message 
> > > I'm encountering.  Maybe someone can help me and
> > > critico1.  -Alan
> > > 
> > > --- In emax@yahoogroups.com, "Roland S-50"
> > > <rolands50@> wrote:
> > > >
> > > > Hmm... I sense a dodgy piece of translation
> > > software has been at 
> > > work here!
> > > > 
> > > > Maybe the 'bellboys' are on strike? :-)
> > > > 
> > > > Sorry, couldn't resist!
> > > > 
> > > > I guess the issue is that this Emax is hanging
> > > after loading?
> > > > 
> > > > What does it display on the screen after loading
> > > the bank?
> > > > 
> > > > Do ANY disks load successfully, or are they all
> > > hanging the machine?
> > > > 
> > > > Cheers,
> > > > 
> > > > Mike.
> > > > 
> > > > On 01/03/2008, critico1 <critico1@> wrote:
> > > > >
> > > > >   greetings friends, my equipment is hung no
> > > longer hoists after 
> > > which
> > > > > it loads the data in a floppy disk formatted
> > > with omniflop and
> > > > > prepared with EMXP, ayudenme that to do nor to
> > > where to go, him
> > > > > change floppy drive? that I do? he loads the
> > > floppy disk and soon 
> > > he
> > > > > hoists themselves and he appears patch in
> > screen
> > > and the bellboys 
> > > do
> > > > > not respond, if somebody knows to something
> > him
> > > enormously thanks 
> > > you
> > > > > a lot
> > > > >
> > > > >  
> > > > >
> > > > 
> > > > 
> > > > [Non-text portions of this message have been
> > > removed]
> > > >
> > > 
> > > 
> > > 
> > 
> > 
> > 
> >        
> > ______________________________________________ 
> > ¿Con Mascota por primera vez? Sé un mejor Amigo.
> > Entra en Yahoo! Respuestas
> > http://es.answers.yahoo.com/info/welcome
> >
>