Emax

Thanks a lot, for a second I thought I had a deffective adapter.

Cheers.




--- In emax@yahoogroups.com, Brian Ronn <brian_ronn@...> wrote:
>
> Hi
>    
>   You have to have the scsi connection terminated at the end of the 
line with a SCSI-terminator or a device which is terminated.
>    
>   Best regards
>    
>   Brian
> 
> brainztain <digitailslide@...> skrev:
>   Hey emaxers,
> 
> I finally got around installing a 50-24pin scsi interface on my 
Emax I 
> rack. I was careful not to let any of the recidue from drilling and 
> cutting of the case to get in the connector/chip board.  
> 
> The problem is that whenver I plug in the connector, I can't boot 
from 
> the floppy.  I haven't plugged in the zip drive yet because I 
haven't 
> bought it, but I'm wondering if after installing the 50-25pin 
adapter 
> you must have the zip disk up and running for the whole thing to 
boot 
> up.
> 
> Anybody know?
> 
> My e-max boots-up fine when I disconnect the adapter though.
> 
> Thanks.
> 
> 
> 
> 
> 
> 
> Emax and Emax II User's Group Website
> 
> http://www.silveriafamily.com 
> 
> 
> 
>   SPONSORED LINKS 
>         Electronic instrument   Emax   Synthesizer music     
Electronic music   Music sampler   Electronic musical instrument 
>     
> ---------------------------------
>   YAHOO! GROUPS LINKS 
> 
>     
>     Visit your group "emax" on the web.
>     
>     To unsubscribe from this group, send an email to:
>  emax-unsubscribe@yahoogroups.com
>     
>     Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service. 
> 
>     
> ---------------------------------
>   
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>