>> If I am seeing "Emax SE 1.1 " my emax is upgraded at least??
Yes, then that would confirm the Emax is SE.>> I see "different software rev" How to solve this?
But any bank on a disk (or HxC image) without the SE OS on that disk won't work for SE functions.
If you are trying to use SE feature with 3.2 OS it won't work.To explain further- Emax doesn't have available memory to load in all OS possible operations.
Therefore, for each activity (Digital process, analog process, etc) it loads in from the OS on the disk the function for that moment which is needed.
But when you switch from one disk (or HxC location) to another with DIFFERENT OS, it sees mismatch of OS and you get the error.
This was always a major thing- to reload the OS onto all the floppies with the new OS version, which is time consuming.
Here- SCSI beats HxC easily. On SCSI media there is only 1 OS which works for all 35 banks. You only put the OS on 1 time for each hard disk...
Hopefully, I have clearly explained above so you may understand why you have been having the issue.
On Sun, Dec 13, 2015 at 2:23 AM, yusteromerooscar@... [emax] <emax@yahoogroups.com> wrote:
So... don´t you need to follow SE Upgrade pdf? I remember in this pdf you see in the emax display the device is being upgraded.. and my idea was Emu would be upgraded and the new features will be extended to all banks but i think it is not correct this idea..
So.. following your steps when I boot the Emu with the 1.1 in the menu I see 1.1 and this is correct, but when I load other bank and I try to access digital features of the SE upgrade, in the display I see "different software rev" How to solve this? If I am seeing "Emax SE 1.1 " my emax is upgraded at least??Thank you!