Emax

I think you may not understand fully. 

I have written some of this on the FAQ, but perhaps I can clarify it further.

ANY Emax can boot with 3.2 OS (assuming you have current EPROM- but I’ve never heard of anyone not having this capability since I joined this group in 2003).

Only Emax with SCSI can boot OS HD 1.0 or  OS HD 1.1

Only Emax with SE update already completed can boot OS SE 1.1

An Emax with SCSI AND SE can boot ALL of the above, and also OS SE HD 1.1 and OS PLUS 1.0

So- you say you think the Emax has 1.1 version.
But which OS are you booting from now? (check it in the menu)

Emax may already have SE update completed.
The only way to know it is to try and boot with an SE-capable OS version.
If you are only booting with 3.2, you will never know whether you have SE or not…

If you don’t have SCSI, then try and create HxC image and boot with SE 1.1

If you do have SCSI, then create PLUS 1.0 OS HxC image.

If it fails (meaning you DON”T have SE), then you will get “Incorrect Software version” or some similar error when you try and boot.

-T




On Dec 11, 2015, at 12:46 PM, yusteromerooscar@... [emax] <emax@yahoogroups.com> wrote:

No, load the upgrade like a sound bank instead of  like a "software or firmware".. 


My Emu emax has 1.1 version (I think, now I haven´t  in front of me the sampler) and  when I go to the master > special > version 





[Non-text portions of this message have been removed]