Emax

Dear Emax Group,
I have an Emax SE rack with late PC333 Rev A board (see pic 001) with E-chip
Rev B mounted on a daughter board (see pic 002).
A blue wire is (was) connected between this daughter board (pic 003) and the
mother board, from the R19 resistor external side (004).
This wire has been de-soldered from the daughter board but I don't know
where it was soldered (amongst the 4 most left pins nearby...).
I did not find any service manual or picture with this configuration (found
some with wire between E-chip pin 1 and 32, but no R19 resistor).
Can anyone help with a picture or schematics ?
Many thanks,
Eric



---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus


[Non-text portions of this message have been removed]