Emax

Ken-

Try using EMXP / omniflop to write a disk (you need a PC for this).

http://users.skynet.be/emxp/

-T

On Mon, Jun 1, 2015 at 9:14 AM, Ken Wheeler kenwheeler@... [emax] <emax@yahoogroups.com> wrote:

The 2 discs are floppies which came with the Emax, I quoted the labels on them (which say cd), but they are not compact discs.

I will try disconnecting the hd drive.

How do I write a new disc?

On 1 Jun 2015, at 17:07, JAMIE logan jammie.emma@... [emax] wrote:

try writing a new disk if that dont work i would say the floppy drive is faulty

have you disconnected the hd drive inside also

the emax wont boot from cd you need a scsi hd which is set to scsi id0 for it to boot from scsi

other wise if you have a device other than that you will need to boot by floppy first to the + version so you can change scsi id

On 1 June 2015 at 16:56, Ken Wheeler kenwheeler@... [emax] <emax@yahoogroups.com> wrote:

Thanks Jamie.

I have 2 discs, "Emax HD 1.1 CD Operating Software" and "Emax Software Master Revision 1.1 HD", which I have tried, both come up with either

"Disc Error" or "Disc not formatted".

On 1 Jun 2015, at 16:10, JAMIE logan jammie.emma@... [emax] wrote:

have you put a os disk in it as thats part off the boot routine if the hard drive has failed it will look for a floppy drive os

On 1 June 2015 at 11:57, Ken Wheeler kenwheeler@... [emax] <emax@yahoogroups.com> wrote:

Hello

I'm new to this group so apologies if this is a well worn topic.

My Emax HD SE keyboard powers up but does not get beyond "Loading Software".

Is this a known issue, if so is there a fix?

Regards

Ken