if you upgraded properly hd1.1 wont work as it will come up as wrong software because of the code segments left by the se os
On 2 July 2014 15:50, JAMIE logan <jammie.emma@...> wrote:
as there are diagnostic routines that was never available in the pre se software for checking the rom and other parts and leaves leds on if there is a problem like if testing and the analog board has been removed an led will come up with analog processing to let you know there is a problem and some times wont boot past the diagnosticsif thats the case then the upgrade did not work correctly and so the code segments needed for the scsi operation does not seem to be working correctly as those images work full stop i have produced 300+ cf cards for people with library on with the plus os image and it boots everytimei would surgest to check if the upgrade disk worked
On 2 July 2014 15:44, xeelox@... [emax] <emax@yahoogroups.com> wrote:
Jammie,
This image didn't work either, but it is the plus OS which might explain it. Any chance you have images w/ SEHD 1.1 and HD 1.1 that I could try?
Thanks,Jim