Emax

That´s why its weird, a serail 2212, is supposed to be 2meg and stereo, mine is 2meg but totally mono...
Either the seller swapped the cards either e-mu sold weird config in the past... My scdi cable works perfectly with other machines like Roland S-760, etc so its not a cablr issue.
I think the scsi chip is dead

Envoyé de mon iPhone

> Le 9 juin 2014 à 17:17, "emuemax92@... [emax]" <emax@yahoogroups.com> a écrit :
> 
> The IP427 means that it is a truely MONO Emax II.
> 
> Do you have a spare external scsi cable that you can use? Maybe the problem with the pheriperals could be as easy as a faulty scsi cable...Be sure to use the correct external scsi cable otherwise it won't work or there is a possibilty you will damage the scsi onboard chip. (Seen that on Inet).
> 
> To help you a little way: All pins of disconnected scsi cable on each end must be iddentical. So pin 1 is pin 1, pin 2 is pin 2 etc. untill last pin. Check with a voltage measurement tool if all pins do make contact.
> 
> I know that the stereo programmed PAL chip is very very difficult to find. But not impossible.
> 
> Best regards,
> Frank
> 
>