Elektron Musical Instruments

I have kind of a silly question.  Anyone know how to automate decay on 
the monomachine? I'm trying to send a control change from Cubase.  
Instead of messages 1-127, the monomachine's implimentation chart 
lists  3a, 3b, and 3c for decay, release and volume respectively.  
Control message 3 is mute on/ off.  Not sure what this means.  Any 
help would be appreciated.  Thanks.

Brian

Hey Brian, "3a, 3b, and 3c" are the message numbers, but using the 
hexadecimal numbering system. If you're not familiar with it, these 
would be the controller numbers in the 1-127 decimal system:
56=56 AMP-Attack
57=57 AMP-Hold
58=58 AMP-Decay
59=59 AMP-Release
60=60 AMP-Dist
61=61 AMP-Vol
62=62 AMP-Pan (see also 10)
63=63 AMP-Port

I made a monomachine definition file (for cakewalk/sonar) which lists 
all the controller numbers, but I guess I never posted it. Well if you 
need additional info I'll just post that thing for future reference.

Still loopy from the anaesthesia,
-andr00

--- In elektron-users@yahoogroups.com, "brsiu2000" <brsiu2000@y...> 
wrote:
> I have kind of a silly question.  Anyone know how to automate decay 
on 

> the monomachine? I'm trying to send a control change from Cubase.  
> Instead of messages 1-127, the monomachine's implimentation chart 
> lists  3a, 3b, and 3c for decay, release and volume respectively.  
> Control message 3 is mute on/ off.  Not sure what this means.  Any 
> help would be appreciated.  Thanks.
> 
> Brian

My man.  You are the man.  I'm actually pretyty unfamiliar with hexidecimal numbering; I should probably read up on it today.  Anyway, your advice fixed the problem so thanks a million.

Brian

Andrew Denyes <andr00@...> wrote:
Hey Brian, "3a, 3b, and 3c" are the message numbers, but using the 
hexadecimal numbering system. If you're not familiar with it, these 
would be the controller numbers in the 1-127 decimal system:
56=56 AMP-Attack
57=57 AMP-Hold
58=58 AMP-Decay
59=59 AMP-Release
60=60 AMP-Dist
61=61 AMP-Vol
62=62 AMP-Pan (see also 10)
63=63 AMP-Port

I made a monomachine definition file (for cakewalk/sonar) which lists 
all the controller numbers, but I guess I never posted it. Well if you 
need additional info I'll just post that thing for future reference.

Still loopy from the anaesthesia,
-andr00

--- In elektron-users@yahoogroups.com, "brsiu2000" <brsiu2000@y...> 
wrote:
> I have kind of a silly question.  Anyone know how to automate decay 
on 
> the monomachine? I'm trying to send a control change from Cubase.  
> Instead of messages 1-127, the monomachine's implimentation chart 
> lists  3a, 3b, and 3c for decay, release and volume respectively.  
> Control message 3 is mute on/ off.  Not sure what this means.  Any 
> help would be appreciated.  Thanks.
> 
> Brian




SPONSORED LINKS 
Musical instruments 

---------------------------------
YAHOO! GROUPS LINKS 


    Visit your group "elektron-users" on the web.
  
    To unsubscribe from this group, send an email to:
 elektron-users-unsubscribe@yahoogroups.com
  
    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


---------------------------------



		
---------------------------------
 Start your day with Yahoo! - make it your home page 

[Non-text portions of this message have been removed]