athomik
On Sep 28 2012, bty78743 wrote:
>
>I worked out one of the problems by switching the Ambicon CF card from the io centre with the prc100 and the network disappeared
>
>On closer inspection I can see the CF card from the PRC is damaged
>Anyone know where I can get these cards in the UK
>?
>
>Hopefully when i get the PRC up and running I might be able to fix the keyboard with a reset...
>
>--- In disklavier@yahoogroups.com, Bill Brandom wrote:
>>
>> Power down the Disklavier again. Then remove the two cables going into the
>> BLUE and GREEN connections from behind the key drive unit treble end, and
>> re-insert.
>>
>> Then, disconnect the two cables going into the BLUE and GREEN connections
>> on the I/O center and re-insert.
>>
>> Power up and then check piano playback. If it still doesn't work, you may
>> want to purchase a high quality double RCA to RCA cable and substitute it
>> for the two cables labeled BLUE and GREEN.
>>
>> Bill
>>
>> On Wed, Sep 26, 2012 at 9:54 AM, Steven Trawford wrote:
>>
>> > **
>> >
>> >
>> > I've done this, power off DKV, unplug for 10 minutes, restart DKV!
>> > Steve Trawford, Manager
>> >
>> > Piano Distributors
>> > 15464 Olive Boulevard
>> > Chesterfield, MO 63017
>> > 636-532-1881
>> >
>> > strawford@...
>> >
>> >
>> >
>> >
>> >
>> >
>> > On Wed, Sep 26, 2012 at 9:01 AM, Wethington, P wrote:
>> >
>> >> **
>> >>
>> >>
>> >> Maybe this has been done, but.... System reset??
>> >>
>> >> I am not sure how to do this without a controller. But I think it's
>> >> available.
>> >>
>> >> --- In disklavier@yahoogroups.com, Roberto Fasciani
>> >> wrote:
>> >> >
>> >> > Hello everybody,
>> >> >
>> >> > I have the very same problem since 2 months.
>> >> > Keyboard doesn't move at all. Pedals yes, quiet mode working. During
>> >> > keys test no one key moves.
>> >> > Internal PianoSoft library doesn't play as well.
>> >> >
>> >> > I already unplugged power cable for 3 weeks while I was on holyday and
>> >> I
>> >> > tried on my return. Nothingh happens.
>> >> > Cables already checked (thanks for suggestion atomik).
>> >> >
>> >> > I have tried to inspect the circuit board opening the wood cover over
>> >> > the keys and I found everything connected and a series of red leds are
>> >> > on (so power supply is connected).
>> >> > Maybe bty8743 may check red leds this way to ensure power supply
>> >> connection.
>> >> >
>> >> > Any suggestion before I buy a new keys control board?
>> >> > Anyone knows the price?
>> >> >
>> >> > My DKV is a DC3MIVPro aged 2007.
>> >> >
>> >> > Thanks in advance for your help
>> >> >
>> >> > Roberto
>> >> >
>> >> > Il 26/09/12 12.52, athomik ha scritto:
>> >> > >
>> >> > > Does the piano play back from the internal PianoSoft libra ry?
>> >> > >
>> >> > >
>> >> > > If not, check the PD/KD cables going from the I/OCentre (big metal
>> >> box
>> >> > > with lots of ventilation holes) to the PK control unit (small box
>> >> > > under the keybed at the treble end). You're looking for the green and
>> >> > > the blue RCA phono jacks. If the piano is old, there has been an
>> >> > > updated version of the cables. If the keys don't even work from the
>> >> > > internal files, you may also have a problem with the PK control board.
>> >> > >
>> >> > > athomik
>> >> > >
>> >> > > On Sep 25 2012, bty78743 wrote:
>> >> > >
>> >> > > >
>> >> > > >Yes midi out is working, i can control a synth from the MIDI out
>> >> > > >Also Midi in is working as I can play the internal piano voice when
>> >> i
>> >> > > connect the headphones.
>> >> > > >
>> >> > > >The pedals respond but not the piano
>> >> > > >
>> >> > > >I also cant connect or pair my PRC100 to the disklavier, tried lots
>> >> > > of different settings but it cant find the piano
>> >> > > >
>> >> > > >BUT I can connect to the disklavier from dkvbrowser on my mac and
>> >> > > play files although its only moving the pedals.
>> >> > > >
>> >> > > >The red LED number 4 on the Power supply unit is on, the unit the
>> >> > > mains connects to.
>> >> > > >
>> >> > > >Any ideas?
>> >> > > >Any help much appreciated!
>> >> > > >
>> >> > > >PS my piano is dc7m4pro
>> >> > > >
>> >> > > >
>> >> > > >
>> >> > > >
>> >> > > >------------------------------------
>> >> >
>> >>
>> >>
>> >
>> >
>>
>
>
>
>
>------------------------------------
>
>To Post a message to the group, send it to: disklavier@...
>
>To Post a private message to Todd Muncy, the group's founder and moderator, send it to:
>disklavier-owner@...
>
>To reach our group's web site go to:
>http://Yahoogroups.com/group/disklavier
>
>THINKING OF LEAVING THE GROUP?
>If you are thinking of unsubcribing because you are getting too much mail, go the the web site and change your email delivery option instead. That will fix the problem, while maintaining your access to the group. If you insist on leaving us completely send a blank email to:
>disklavier-unsubscribe@...
>
>Know someone who wants to join? Have them send a blank email to:
>disklavier-subscribe@... or give them this link:
>http://Yahoogroups.com/group/disklavier/join
>Yahoo! Groups Links
>
><*> To visit your group on the web, go to:
> http://groups.yahoo.com/group/disklavier/
>
><*> Your email settings:
> Individual Email | Traditional
>
><*> To change settings online go to:
> http://groups.yahoo.com/group/disklavier/join
> (Yahoo! ID required)
>
><*> To change settings via email:
> disklavier-digest@yahoogroups.com
> disklavier-fullfeatured@yahoogroups.com
>
><*> To unsubscribe from this group, send an email to:
> disklavier-unsubscribe@yahoogroups.com
>
><*> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>