Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: Mark IV PRC - 100 Communication Issue

2016-01-31 by david.masher@...

Hi Bill, I did follow your instructions. The only thing I see under network is Wireless LAN - TCP/IP-TEMP... When I try to assign it I then receive a piano assign alert stating "Not connecting to Disklavier I/O Center. Please check that you Disklavier is on..."

Then It tries again but in the popup window it now says Wireless LAN - TCP/IP. It takes longer and look like it might work. Then says initializing, the network offline. I do not see DKCxxxxxx any where. I used to but can't recall if that was on my home network or when assigning the piano.

I know you know this :-) all I'm trying to do is get the PRC-100 to talk to the piano. I am not trying to get on to my home network. I'll dig into that later.

Again thanks for your help and this can wait until the work week.

David

PS I own a software company and feel pretty stupid right now :-)

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.