On Oct 5, 2011, at 10:10 AM, grandpollo wrote: > That's the oint. It doesn't pop back at all. The free piece has two small holes at the bottom. The fixed piece has two larger holes. Holes don't pop into holes. > > Looking at it I have no idea how it stayed together at all which made me ask if there is a missing piece intended to join the two parts, that would have large pins on one side and small on the other. > > I used black electrical tape to fasten the two halves but I am sure there's a part missing. If so, we will certainly replace it. When I look inside one, I see large holes in the back (attached to the base) and small pins (with holes inside them, to minimize shrinkage in cooling) that fit inside the larger holes. Sounds like you may have sheared the small pins off, or it would not have stayed together previously. Send me a photo of the two pieces (an iPhone photo would be fine) to CDTobie@..., and I'll see what component we need to send you. C. David Tobie Global Product Technology Manager Datacolor 5 Princess Road Lawrenceville, NJ 08648, USA 609.924.2189 www.datacolor.com Phone: 207.685.9248 Mobile: 207.312.0448 Fax: 207.685.4455 Email: cdtobie@datacolor.com Skype: cdtobie
Message
Re: [datacolor_group] Re: Base for Spyder 3 Reader - how does this thing go together?
2011-10-05 by C D Tobie