Cgs synth

Howdy All,

I finally got around to posting some photos of my CGS modules in the
Photos section. All my stuff is Moog/dotcom form factor. I also
updated my website with info on how I've been silkscreening my
panels:

http://www.guitarfool.com/modular.html
http://www.guitarfool.com/Silkscreen.html

I'd have to say that the Wave Multiplier module is may favorite so
far, but lately I've been having a lot of fun with the Sequential
Switch clocked at audio frequencies...

Jeff

Now thems is good looking DIY panels - MUCH better than the ones I do!

Ken

Superb job !

> Howdy All,
>
> I finally got around to posting some photos of my CGS modules in the
> Photos section. All my stuff is Moog/dotcom form factor. I also
> updated my website with info on how I've been silkscreening my
> panels:
>
> http://www.guitarfool.com/modular.html
> http://www.guitarfool.com/Silkscreen.html
>
> I'd have to say that the Wave Multiplier module is may favorite so
> far, but lately I've been having a lot of fun with the Sequential
> Switch clocked at audio frequencies...
>
> Jeff
>
>
> See the following URLS for the CGS Modular Synth home page:
> Main: http://www.cgs.synth.net/
> Secondary: http://otherunicorn.0catch.com/synth/
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
> Printer at MyInks.com. Free s/h on orders $50 or more to the US &
> Canada.
> http://www.c1tracking.com/l.asp?cid=5511
> http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/QnLolB/TM
> ---------------------------------------------------------------------
> ~->
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/cgs_synth/
>
> To unsubscribe from this group, send an email to:
> cgs_synth-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>

-------------------------------------------------------------
Yves Usson

Lab. TIMC UMR5525 CNRS
Institut d'Ingéniérie et de l'Information de Santé (IN3S)
Faculté de Médecine
Domaine de la Merci
38706 La Tronche cedex

email : yves.usson@..., yves.usson@...

tel. (+33) (0)456 520 074
fax. (+33) (0)456 520 022

I have a couple of ASR PCBs built. I am getting ready to repackage
then into a revised module format. One of the features I plan to add
is an internal clock. I'll still set it up so an external clock can
be jacked in or so that the internal clock can be used externally.

I do not have any experience with using this module. I have played
around with it some, but I know there are many out there with who
have more time and experience with this one. So, I am seeking some
advice and feedback.

1. What are different ways that people are using this module.

2. What is the effective range of frequency for the clock. I ask
this last one, because when I add my internal clocks (will be using a
dual timer 556 chip), I plan to size up the supporting components for
a control range on the panel pot that represents only the useable
range of the ASR instead of making the useful part of the control
range only a fraction of the control rotation.

Thanks
Larry Hendry



__________________________________
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online.
http://taxes.yahoo.com/filing.html