Cgs synth

Hello, please some help.
Please how I can get some more level at the output or at least the same as input signal, I can route the out signal to other module but I preffer to have the mixer as more compact better.
Any help appreciated.
Thanks a lot.

Increase the value of the resistor between pin 6 of the op-amp and the output.
120k will give a little more gain. 200k will double the output. Or put a
trimmer in series with the 100k there and adjust it.

Thanks a lot, now work perfect!

--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
> Increase the value of the resistor between pin 6 of the op-amp and the output.
> 120k will give a little more gain. 200k will double the output. Or put a
> trimmer in series with the 100k there and adjust it.
>
>
>
> >Hello, please some help.
> >Please how I can get some more level at the output or at least the same as
> input signal, I can route the out signal to other module but I preffer to
> have the mixer as more compact better.
> >Any help appreciated.
> >Thanks a lot.
> >
> >
> >
> >------------------------------------
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >Yahoo! Groups Links
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@... otherunicorn@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
>