Yahoo Groups archive

Cgs synth

Index last updated: 2026-04-28 23:16 UTC

Thread

Sub Oscillator rev1 V rev2

Sub Oscillator rev1 V rev2

2011-05-01 by drryle

OK Scott, going back to your roots here.

I'm verifying that the revision #2 Sub Oscillator panel layout would work like this...

The 1n5 (1500pF) caps are substituted for the 330pF caps now. Is this necessary to switch if using the rev 2 layout?

Thanks,

David Ryle

Re: Sub Oscillator rev1 V rev2

2011-05-01 by cg_synth

--- In cgs_synth@yahoogroups.com, "drryle" <dryle@...> wrote:
Show quoted textHide quoted text
>
> OK Scott, going back to your roots here.
>
> I'm verifying that the revision #2 Sub Oscillator panel layout would work like this...
>
> The 1n5 (1500pF) caps are substituted for the 330pF caps now. Is this necessary to switch if using the rev 2 layout?
>
> Thanks,
>
> David Ryle
>

It won't hurt. Latest PCBs have 1n5 on them anyway.

Re: Sub Oscillator rev1 V rev2

2011-05-09 by drryle

I noticed the Rev2.1 changes on the board and design. You changed some mixer components as well.
Show quoted textHide quoted text
--- In cgs_synth@yahoogroups.com, "cg_synth" <sasami@...> wrote:
>
>
>
> --- In cgs_synth@yahoogroups.com, "drryle" <dryle@> wrote:
> >
> > OK Scott, going back to your roots here.
> >
> > I'm verifying that the revision #2 Sub Oscillator panel layout would work like this...
> >
> > The 1n5 (1500pF) caps are substituted for the 330pF caps now. Is this necessary to switch if using the rev 2 layout?
> >
> > Thanks,
> >
> > David Ryle
> >
>
> It won't hurt. Latest PCBs have 1n5 on them anyway.
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.