Cgs synth

>on /2 phase 1&2 light/trigger at the same time, and phases 3&4 go at the

same time.

Sounds wrong.

>/8 goes from bottom to top. (lights go from phase 4, 3, 2, 1, where the

others go 1,2,3,4)

A possible misslabeling on the PCB.

>There are always 2 LED's lit per division channel. 1-2, 2-3, 3-4, 4-1, cycle

Correct. All waves are 50% duty cycle.

Ken
_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Thanks a lot! I will look into /2, and am glad to hear the rest are as they should be. It was a lot of fun playing with it last night while I was testing it. (what won't be fun is making all the cables I'm going to need now :D)

I think there may be a labeling issue on the PCB for /8. I found a post on electro-music where someone had the exact same issue.

If anyone else here built the master divider v2.1 see if the phases for /8 trigger sequentially 1-4 or 4-1.
Obviously, not a big deal and easy to fix, but if it is mislabeled, lets find out so a note can be put on the build page for it.
(this circuit is a bit over my head, so maybe whatever my issue is on channel /2 is causing /8 to run backwards. Probably not, but I don't know...)

Thanks again, Ken. And for the other Gate Seq reply. I'm sure I'll get that sorted out soon enough, as it almost works!