Cgs synth

--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
>
> Obviously someone must kicked the designer pretty hard, as he appears to
> have gotten off his ass and finished updating the CGS22 master divider.
>
> The proto run has a few errors on the board. Details for mods are given.
> These boards are $10. Price goes up to $15 when the next batch is made.
> _______________________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>

>Ken,
>
>I've stuffed and installed the new divider. No errors that you didn't
>point out on your web site. But at 0 degree the divide by 2 out is
>changing state on the rising edge of the input while divide by 4, 8 &
>16 change state on the falling edge (I haven't checked the other phase
>outs). Is that the normal behavior or did I mess something up?
>Hopefully I can investigate further in a few days, but I thought I'd
>check with you.
>
>--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>>
>>
>> Obviously someone must kicked the designer pretty hard, as he appears to
>> have gotten off his ass and finished updating the CGS22 master divider.
>>
>> The proto run has a few errors on the board. Details for mods are given.
>> These boards are $10. Price goes up to $15 when the next batch is made.
>> _______________________________________________________________________
>> Ken Stone sasami@...
>> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
>> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>>
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
>
> I'm not sure who's fault it is, but the cure is simple - move each
of the /2
> div connections along by two jacks.
>
> >Ken,
> >
> >I've stuffed and installed the new divider. No errors that you didn't
> >point out on your web site. But at 0 degree the divide by 2 out is
> >changing state on the rising edge of the input while divide by 4, 8 &
> >16 change state on the falling edge (I haven't checked the other phase
> >outs). Is that the normal behavior or did I mess something up?
> >Hopefully I can investigate further in a few days, but I thought I'd
> >check with you.
> >
> >--- In cgs_synth@yahoogroups.com, sasami@ wrote:
> >>
> >>
> >> Obviously someone must kicked the designer pretty hard, as he
appears to
> >> have gotten off his ass and finished updating the CGS22 master
divider.
> >>
> >> The proto run has a few errors on the board. Details for mods are
given.
> >> These boards are $10. Price goes up to $15 when the next batch is
made.
> >>
_______________________________________________________________________
> >> Ken Stone sasami@
> >> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> >> Australian Miniature Horses & Ponies
<http://www.blaze.net.au/~sasami/>
> >>
> >
> >
> >
> >------------------------------------
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >Yahoo! Groups Links
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>