Ken,
I've stuffed and installed the new divider. No errors that you didn't
point out on your web site. But at 0 degree the divide by 2 out is
changing state on the rising edge of the input while divide by 4, 8 &
16 change state on the falling edge (I haven't checked the other phase
outs). Is that the normal behavior or did I mess something up?
Hopefully I can investigate further in a few days, but I thought I'd
check with you.
I've stuffed and installed the new divider. No errors that you didn't
point out on your web site. But at 0 degree the divide by 2 out is
changing state on the rising edge of the input while divide by 4, 8 &
16 change state on the falling edge (I haven't checked the other phase
outs). Is that the normal behavior or did I mess something up?
Hopefully I can investigate further in a few days, but I thought I'd
check with you.
--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
>
> Obviously someone must kicked the designer pretty hard, as he appears to
> have gotten off his ass and finished updating the CGS22 master divider.
>
> The proto run has a few errors on the board. Details for mods are given.
> These boards are $10. Price goes up to $15 when the next batch is made.
> _______________________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>