Synth-DIY Yahoo! Groups Archives

Grounding issues CGS 48

2007-04-17 by Mickey Finn

Cheers. On the panel side of the module, I've intalled all the pots. Do they all share a
common ground to the pcb? There are 3 tabs, the wiper is the center, so that will go to the
specific output on the PCB, what about the other 2??

Thanks-

COleman.

Re: Grounding issues CGS 48

2007-04-17 by sasami@hotkey.net.au

If they are being connected to a CV input, the top end goes to +15, and the
bottom end goes to either ground or -VE depending on the desired range. If
you are talking about tuning pots, use -VE.

Ken

Show quoted textHide quoted text

>Cheers. On the panel side of the module, I've intalled all the pots. Do

they all share a

>common ground to the pcb? There are 3 tabs, the wiper is the center, so

that will go to the

>specific output on the PCB, what about the other 2??
>
>Thanks-
>
>COleman.
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Cgs synth

Grounding issues CGS 48

Grounding issues CGS 48

Re: Grounding issues CGS 48

Move to quarantaine