"To stuff or not to stuff. that is the question", or was it: "Stuff
first ask questions later" :-)
Thanx for the answers John and Ken!
I'll first try the original design and if I find any pot range trouble
I'll try Johns adaptions.
Just found out my Wima 2n2's don't fit next to each other, bummer.
Will let everyone know how it works out.
Krimo
-----Original Message-----
From: sasami@... [mailto:sasami@...]
Sent: zaterdag 7 februari 2004 22:45
To: cgs_synth@yahoogroups.com
Subject: RE: [cgs_synth] Steiner questionne
You can stuff the Rev 1 board exactly as it is. It is correct.
dealt
with some minor errors. Not many of these were made either. Rev 1
covered
more errors and Nyle's suggestions, and is the bulk of the PCBs that
have
been made.
1uF
is the correct way on the PCB.
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
See the following URLS for the CGS Modular Synth home page:
Main: http://www.cgs.synth.net/
Secondary: http://otherunicorn.0catch.com/synth/
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://rd.yahoo.com/SIG=12cfn93ea/M=268585.4521611.5694062.1261774/D=eg
roupweb/S=1705032144:HM/EXP=1076276727/A=1950447/R=0/*http:/ashnin.com/c
lk/muryutaitakenattogyo?YH=4521611&yhad=1950447> click here
<http://us.adserver.yahoo.com/l?M=268585.4521611.5694062.1261774/D=egrou
pweb/S=:HM/A=1950447/rand=724321117>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/cgs_synth/
* To unsubscribe from this group, send an email to:
cgs_synth-unsubscribe@yahoogroups.com
<mailto:cgs_synth-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.
[Non-text portions of this message have been removed]
first ask questions later" :-)
Thanx for the answers John and Ken!
I'll first try the original design and if I find any pot range trouble
I'll try Johns adaptions.
Just found out my Wima 2n2's don't fit next to each other, bummer.
Will let everyone know how it works out.
Krimo
-----Original Message-----
From: sasami@... [mailto:sasami@...]
Sent: zaterdag 7 februari 2004 22:45
To: cgs_synth@yahoogroups.com
Subject: RE: [cgs_synth] Steiner questionne
You can stuff the Rev 1 board exactly as it is. It is correct.
>> Doing Oakley SVF and CGS Steiner VCF this weekend. Got a fewquestions
>> about the notes/modifications, mainly because I can't figure outThe first run was the prototype run - only 10 boards. The second run
>> difference between "Rev 1" and "first and second run" (I think second
>> run isn't necessarily the same as Rev1?)
dealt
with some minor errors. Not many of these were made either. Rev 1
covered
more errors and Nyle's suggestions, and is the bulk of the PCBs that
have
been made.
>> -Is it correct that input elec's polarities are all correct on therev 1
>> pcb?yes.
>> -Is it correct that the 10 uF elec between output transistors andinput
>> of the op amp buffer still has to be installed backwards on the rev 1No. The 10 uF in question was replaced by a 1uF in Nyle's revision. The
>> pcb?
1uF
is the correct way on the PCB.
>> -Is it correct that all the changes suggested by Nyle Steiner arefor
>> processed on the rev 1 pcb and that I can just "stuff away" except
>> last question?just stuff away.
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
See the following URLS for the CGS Modular Synth home page:
Main: http://www.cgs.synth.net/
Secondary: http://otherunicorn.0catch.com/synth/
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://rd.yahoo.com/SIG=12cfn93ea/M=268585.4521611.5694062.1261774/D=eg
roupweb/S=1705032144:HM/EXP=1076276727/A=1950447/R=0/*http:/ashnin.com/c
lk/muryutaitakenattogyo?YH=4521611&yhad=1950447> click here
<http://us.adserver.yahoo.com/l?M=268585.4521611.5694062.1261774/D=egrou
pweb/S=:HM/A=1950447/rand=724321117>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/cgs_synth/
* To unsubscribe from this group, send an email to:
cgs_synth-unsubscribe@yahoogroups.com
<mailto:cgs_synth-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.
[Non-text portions of this message have been removed]