Cgs synth

You can stuff the Rev 1 board exactly as it is. It is correct.

>> Doing Oakley SVF and CGS Steiner VCF this weekend. Got a few questions
>> about the notes/modifications, mainly because I can't figure out
>> difference between "Rev 1" and "first and second run" (I think second
>> run isn't necessarily the same as Rev1?)

The first run was the prototype run - only 10 boards. The second run dealt
with some minor errors. Not many of these were made either. Rev 1 covered
more errors and Nyle's suggestions, and is the bulk of the PCBs that have
been made.

>> -Is it correct that input elec's polarities are all correct on the rev 1
>> pcb?

yes.

>> -Is it correct that the 10 uF elec between output transistors and input
>> of the op amp buffer still has to be installed backwards on the rev 1
>> pcb?

No. The 10 uF in question was replaced by a 1uF in Nyle's revision. The 1uF
is the correct way on the PCB.

>> -Is it correct that all the changes suggested by Nyle Steiner are
>> processed on the rev 1 pcb and that I can just "stuff away" except for
>> last question?

just stuff away.

_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>